A
-
Aazami, A.
A Bi-objective Robust Optimization Model for an Integrated Production-distribution Problem of Perishable Goods with Demand Improvement Strategies: A Case Study [Volume 34, Issue 7, 2021, Pages 1766-1777]
-
Abbas, H. O.
Behavior of Gypseous Soil under Static and Dynamic Loading [Volume 34, Issue 8, 2021, Pages 1882-1887]
-
Abbas, S. A.
Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
-
Abbasian, T.
A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
-
Abbass, M. M.
Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
-
Abbaszadeh, K.
Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
-
Abbaszadeh, M.A.
Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
-
Abd Al-Hamza, M.
Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
-
Abd Ali, H. S.
Effect of Additional Zirconia on Fracture Mechanics of Bioactive Glass-ceramics Using Digital Image Correlation [Volume 34, Issue 9, 2021, Pages 2053-2059]
-
Abd- Awn, S. H.
Behavior of Gypseous Soil under Static and Dynamic Loading [Volume 34, Issue 8, 2021, Pages 1882-1887]
-
Abdolrahimi, H.
A Novel Model Predictive Voltage Control of Brushless Cascade Doubly-Fed Induction Generator in Stand-Alone Power Generation System [Volume 34, Issue 5, 2021, Pages 1239-1249]
-
Abdoos, A. A.
A New Simple Method to Avoid Maloperation of Transformer Restricted Earth Fault Relay during External Fault Events [Volume 34, Issue 9, 2021, Pages 2070-2076]
-
AbdulRahman, Sh.
Influence of Plastic Fiber on the Geotechnical Properties of Gypseous Soil [Volume 34, Issue 2, 2021, Pages 367-374]
-
Abdulridha, A. A.
Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
-
Abedi, M.
Robust Three Stage Central Difference Kalman Filter for Helicopter Unmanned Aerial Vehicle Actuators Fault Estimation [Volume 34, Issue 5, 2021, Pages 1290-1296]
-
Abedi, M.
Performance of Reinforced Concrete Shear Wall Equipped with an Innovative Hybrid Damper [Volume 34, Issue 7, 2021, Pages 1632-1643]
-
Abedini-Ahangarkola, H.
Design and Analysis of High Efficiency Perovskite Solar Cells with Light Trapping Nano-textured Substrates [Volume 34, Issue 4, 2021, Pages 873-880]
-
Abrahim, M. J.
Effect of Matric Suction on Deformation of Gypseous Sand Using Modified Oedometer [Volume 34, Issue 12, 2021, Pages 2636-2641]
-
Abtahi, Z.
Robust and Stable Flow Shop Scheduling Problem under Uncertain Processing Times and Machines’ Disruption [Volume 34, Issue 4, 2021, Pages 935-947]
-
Achyutha kumar reddy, M.
Optimization of Calcined Bentonite Clay Utilization in Cement Mortar using Response Surface Methodology [Volume 34, Issue 7, 2021, Pages 1623-1631]
-
Adami, P.
Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
-
Adibi, T.
Sensitivity Analysis on Thermal Performance of Gas Heater with Finned and Finless Tubes using Characteristics-based Method [Volume 34, Issue 6, 2021, Pages 1537-1544]
-
Adlparvar, M.R.
Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
-
Adri, A.
Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
-
Afjei, E.
Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
-
Afkar, A.
Experimental Investigation of TIG Welding Input Parameters Effects on Mechanical Characteristics [Volume 34, Issue 2, 2021, Pages 564-571]
-
Afkar, A.
A study on the modified algorithm for image processing in Tracking Seam Welding [Volume 34, Issue 8, 2021, Pages 1913-1922]
-
Afrang, S.
A new wide tunability MEMS based variable capacitor using two separate electro-static vertical comb drive actuators [Volume 34, Issue 11, 2021, Pages 2534-2544]
-
Aghababa, H.
Employing the Empirical Mode Decomposition to Denoise the Random Telegraph Noise [Volume 34, Issue 1, 2021, Pages 90-96]
-
Aghaei, A.
Electromagnetic Wave Absorption Properties of Barium Ferrite/Reduced Graphene Oxide Nanocomposites [Volume 34, Issue 6, 2021, Pages 1503-1511]
-
Aghazadeh, H.
Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
-
Ahadi Akhlaghi, I.
Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
-
Ahmadi, H.
Seismic Analysis of Double Deck Floating Roofs of Siraf Storage Tanks with Condensate, Light and Heavy Crude Oils [Volume 34, Issue 10, 2021, Pages 2319-2331]
-
Ahmadi, M.
Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
-
Ahmad Moazam, M.
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Akbari, G. H.
Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
-
Akhlaghi Modiri, F.
Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
-
Akhtarpour, A.
Numerical Evaluation of Slope Stability for Construction and Seismic Loads: Case Study [Volume 34, Issue 7, 2021, Pages 1602-1610]
-
Alamdar, H.
Using Universal Nand-nor-inverter Gate to Design D-latch and D Flip-flop in Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 7, 2021, Pages 1710-1717]
-
Alan, M P.N
Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
-
Al-Ani, M. S.
Routing Protocols for IOT Applications based on Distributed Learning [Volume 34, Issue 4, 2021, Pages 825-831]
-
Al-dujaili, M. A. Ahmed
Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
-
Alemi-Rostami, M.
Selective Harmonic Elimination of a Multilevel Voltage Source Inverter Using Whale Optimization Algorithm [Volume 34, Issue 8, 2021, Pages 1898-1904]
-
Alfatlawi, T. J.M.
Experimental and Nonlinear Analysis of Cracking in Concrete Arch Dams Due to Seismic Uplift Pressure Variations [Volume 34, Issue 5, 2021, Pages 1156-1166]
-
Al-Haidari, H. S.
Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
-
Alhassani, A. M.J.
Analysis of Under-Reamed Piles Subjected to Different Types of Load in Clayey Soil [Volume 34, Issue 8, 2021, Pages 1940-1948]
-
Al-Haydari, I. S.
Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
-
Al-Hydary, I. A. Disher
Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
-
Ali, I. F.
Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
-
Ali, I. F.
Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
-
Aliakbarian, H.
Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method [Volume 34, Issue 11, 2021, Pages 2408-2417]
-
Alihosseini, A.
Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
-
Alisjahbana, S. W.
Soft System Methodology: Project vs Local Community Interests in Project Social Conflict [Volume 34, Issue 9, 2021, Pages 2107-2115]
-
Alizadeh, B.
Stability Analysis of AC/DC Microgrids in Island Mode [Volume 34, Issue 7, 2021, Pages 1750-1765]
-
Alizadeh Kharkeshi, B.
Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
-
Al-Jaberi, Z.
Numerical Study on Flexural Behavior of Concrete Beams Strengthened with Fiber Reinforced Cementitious Matrix Considering Different Concrete Compressive Strength and Steel Reinforcement Ratio [Volume 34, Issue 4, 2021, Pages 793-802]
-
Aljazaeri, Z. R.
Numerical Study on Flexural Behavior of Concrete Beams Strengthened with Fiber Reinforced Cementitious Matrix Considering Different Concrete Compressive Strength and Steel Reinforcement Ratio [Volume 34, Issue 4, 2021, Pages 793-802]
-
Al-Neami, M. A.
Effect of Hydrodynamic Pressure on Saturated Sand Supporting Liquid Storage Tank During the Earthquake [Volume 34, Issue 5, 2021, Pages 1176-1183]
-
Alsharifi, Z.
Numerical Evaluation of Slope Stability for Construction and Seismic Loads: Case Study [Volume 34, Issue 7, 2021, Pages 1602-1610]
-
Al-Sultani, S. A. J.
Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
-
Alvanchi, A.
Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
-
Alwash, N. A.
Comparative Study on Structural Behavior of Reinforced Concrete Straight Beam and Beams with out of Plane Parts [Volume 34, Issue 10, 2021, Pages 2280-2293]
-
AlyanNezhadi, M. M.
A Signal Processing Method for Text Language Identification [Volume 34, Issue 6, 2021, Pages 1413-1418]
-
Aminmahalati, A.
Investigating the Performance of CO Boiler Burners in the RFCC Unit with CFD Simulation [Volume 34, Issue 3, 2021, Pages 587-597]
-
Amirahmadi, M.
Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
-
Amirshenava, S.
Development of open-pit mine reclamation cost estimation models: A regression-based approach [Volume 34, Issue 11, 2021, Pages 2467-2475]
-
Amirzadeh, Z.
Designing Bi-directional Counters Using Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 4, 2021, Pages 901-907]
-
Amouei, M.
A Game-Theoretic Approach for Robust Federated Learning [Volume 34, Issue 4, 2021, Pages 832-842]
-
Anand, N.
Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
-
Andoko, A.
Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
-
Arab Khaburi, D.
A Novel Model Predictive Voltage Control of Brushless Cascade Doubly-Fed Induction Generator in Stand-Alone Power Generation System [Volume 34, Issue 5, 2021, Pages 1239-1249]
-
Arbabtafti, M.
Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
-
Arbabtafti, M.
Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
-
Ardana, M.D.W
The Post-disaster House: Simple Instant House using Lightweight Steel Structure, Bracing, and Local Wood Wall [Volume 34, Issue 2, 2021, Pages 348-354]
-
Ardeshir, G.
Using Universal Nand-nor-inverter Gate to Design D-latch and D Flip-flop in Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 7, 2021, Pages 1710-1717]
-
Argimbaev, K. R.
Korkinsk Brown Coal Open Pit as a Case Study of Endogenous Fires [Volume 34, Issue 1, 2021, Pages 293-304]
-
Argimbaev, K. R.
Exploration of Rhenium Volcanogenic Deposit and Technology of Its Development [Volume 34, Issue 4, 2021, Pages 1052-1065]
-
Argimbaev, K. R.
Kudryavy Volcano Crater Thick Rocks Electrical Breakdown Study in 50 Hz Electromagnetic Field [Volume 34, Issue 5, 2021, Pages 1371-1380]
-
Arish, N.
Evaluation of Linear Permanent Magnet Vernier Machine Topologies for Wave Energy Converters [Volume 34, Issue 2, 2021, Pages 403-413]
-
Arish, N.
Analysis of a New Linear Dual Stator Consequent Pole Halbach Array Flux Reversal Machine [Volume 34, Issue 8, 2021, Pages 2002-2009]
-
Arkat, J.
Reactive Scheduling Addressing Unexpected Disturbance in Cellular Manufacturing Systems [Volume 34, Issue 1, 2021, Pages 162-170]
-
Arkat, J.
Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
-
Arkat, J.
Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
-
Arulraj, P. G.
Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
-
Arunraj, E.
A Novel Lightweight Phase-changing Cooling Roof Tile [Volume 34, Issue 6, 2021, Pages 1398-1406]
-
Asadollahzadeh, M.
Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach [Volume 34, Issue 2, 2021, Pages 508-516]
-
Asadpour, M.
A Blood Supply Chain Network with Backup Facilities Considering Blood Groups and Expiration Date: A Real-world Application [Volume 34, Issue 2, 2021, Pages 470-479]
-
A. Samani, A.
Essential Improvements in Gypsum Mortar Characteristics [Volume 34, Issue 2, 2021, Pages 319-325]
-
Asgari, M.S.
Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
-
Asgari, S.
A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
-
Askari, T.
Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
-
Aslami, M. H.
Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
-
Assadat Yaghubi, N.
Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
-
Assadi, A.
Size-dependent Vibration Analysis of Stepped Nanobeams Based on Surface Elasticity Theory [Volume 34, Issue 3, 2021, Pages 744-749]
-
Aswad, M. A.
Effect of Additional Zirconia on Fracture Mechanics of Bioactive Glass-ceramics Using Digital Image Correlation [Volume 34, Issue 9, 2021, Pages 2053-2059]
-
Awang, M.
Introducing an Enhanced Friction Model for Developing Inertia Welding Simulation: A Computational Solid Mechanics Approach [Volume 34, Issue 3, 2021, Pages 737-743]
-
Azami, G.
Bandwidth Management with Congestion Control Approach and Fuzzy Logic [Volume 34, Issue 4, 2021, Pages 891-900]
-
Azdast, T.
Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
-
Azimi, E.
Effect of Critical Variables on Air Dense Medium Fluidized Bed Coal Drying Efficiency and Kinetics [Volume 34, Issue 5, 2021, Pages 1362-1370]
-
Azimi, Y.
Determining the Optimal Maintenance Strategy for Ammonium Hydroxide Production Unit Using Risk-Based Inspection and Analytic Hierarchy Process [Volume 34, Issue 9, 2021, Pages 2087-2096]
-
Azizian, D.
Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
-
Az-Zahra, N.
Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
B
-
Babaeimorad, S.
A joint optimization model for production scheduling and preventive maintenance interval [Volume 34, Issue 11, 2021, Pages 2508-2516]
-
Babagoli, M.
A Hybrid Modified Grasshopper Optimization Algorithm and Genetic Algorithm to Detect and Prevent DDoS Attacks [Volume 34, Issue 4, 2021, Pages 811-824]
-
Babaheydari, R M
Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
-
Babenko, V.
Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
-
Babenko, V.
Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
-
Babyr, N. V.
System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
-
Badaghei, R.
Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
-
Bagheri, F.
Semantic Segmentation of Lesions from Dermoscopic Images using Yolo-DeepLab Networks [Volume 34, Issue 2, 2021, Pages 458-469]
-
Bagheri Sharebabaki, F.
Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
-
Bahjat, S.
Magnetohydrodynamic (MHD) Flow in a Channel Including a Rotating Cylinder [Volume 34, Issue 1, 2021, Pages 224-233]
-
Bahrami, L.
Effect of motivation, opportunity and ability on human resources information security management considering the roles of Attitudinal, behavioral and organizational factors [Volume 34, Issue 12, 2021, Pages 2624-2635]
-
Bahrami, M.
Large-Scale Experimental Study on Collapsible Soil Improvement Using Encased Stone Columns [Volume 34, Issue 5, 2021, Pages 1145-1155]
-
Bahrebar, M.
Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
-
Bakhshan, Y.
Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics [Volume 34, Issue 1, 2021, Pages 234-242]
-
Bakhshandeh Amnieh, H.
A Study of Blast–Induced Vibration on Oil Pipelines based on Numerical and Field Analysis [Volume 34, Issue 9, 2021, Pages 2116-2123]
-
Balamurali, K.
Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
-
Baleghi, Y.
Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
-
Band Band, H.
Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
-
Banejad, M.
A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
-
Barazandeh, A.
Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
-
Barkhordari, M.S.
Straightforward Prediction for Responses of the Concrete Shear Wall Buildings Subject to Ground Motions Using Machine Learning Algorithms [Volume 34, Issue 7, 2021, Pages 1586-1601]
-
Barrios, A. M.
Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
-
Barzegar, B.
A Hidden Markov Model for Morphology of Compound Roles in Persian Text Part of Tagging [Volume 34, Issue 11, 2021, Pages 2494-2507]
-
Behrad Vakylabad, A.
Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
-
Beirami, B. A.
Supervised and Unsupervised Clustering Based Dimensionality Reduction of Hyperspectral Data [Volume 34, Issue 6, 2021, Pages 1407-1412]
-
Benamer, R
Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
-
Besmi, M.R.
Multi-objective optimization design and Verification of Interior PMSG Based on Finite Element Analysis and Taguchi method [Volume 34, Issue 9, 2021, Pages 2097-2106]
-
Bharti, D.
Graph Theoretic Loss Allocation Method for Microgrids having Variable Generation [Volume 34, Issue 9, 2021, Pages 2060-2069]
-
Bhat, J. A.
Improved Strength and Stiffness Characteristics of Cross-laminated Poplar Timber Columns [Volume 34, Issue 4, 2021, Pages 803-810]
-
Bhatt, D. V.
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
-
Bigdeli, M.
The Prediction of Stress and Strain Behaviors in Composite Gears using FEM [Volume 34, Issue 2, 2021, Pages 556-563]
-
Bigdeli, M.
Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
-
Blaabjerg, F.
A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
-
Boiko, J. M.
Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]
-
Bora, C.
Effects of cold rolling and annealing time on fatigue resistance of AA5052 aluminum alloy [Volume 34, Issue 9, 2021, Pages 2189-2197]
-
Boukharouba, T.
Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
-
Boyer, O.
A Blood Supply Chain Network with Backup Facilities Considering Blood Groups and Expiration Date: A Real-world Application [Volume 34, Issue 2, 2021, Pages 470-479]
-
Bozorgi-Amiri, A.
A Bi-level Programming Approach for Pre-positioning Emergency Warehouses [Volume 34, Issue 1, 2021, Pages 128-139]
-
Broumandnia, A.
Improvement of Multi-agent Routing Guidance with an Intelligent Traffic Light Scheduling and the Ability to Select Intermediate Destinations [Volume 34, Issue 4, 2021, Pages 854-862]
-
Burgos, L. M.
Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
-
B. Wani, S.
Influence of Bi-directional Fibreglass Grid Reinforcement on Drying Shrinkage and Mechanical Properties of Lightweight Foamed Concrete [Volume 34, Issue 1, 2021, Pages 10-18]
C
-
Cano-Europa, E.
Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
-
Chakrabarty, R.
Design of Area Efficient Single Bit Comparator Circuit using Quantum dot Cellular Automata and its Digital Logic Gates Realization [Volume 34, Issue 12, 2021, Pages 2672-2678]
-
Chan, H.Y.
Concepts, Key Challenges and Open Problems of Federated Learning [Volume 34, Issue 7, 2021, Pages 1667-1683]
-
Chandra, S.
Carbon Nanotube Field Effect Transistors Based Digitally Reconfigurable Single Differential Voltage Current Conveyor based Analog Biquadratic Multifunctional Filter at 32nm Technology Node [Volume 34, Issue 11, 2021, Pages 2424-2432]
-
Chelongar, A.
Effect of Critical Variables on Air Dense Medium Fluidized Bed Coal Drying Efficiency and Kinetics [Volume 34, Issue 5, 2021, Pages 1362-1370]
-
Chin, C. Seong
Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
-
Chinforoush, N.
A Novel Method for Forecasting Surface Wind Speed using Wind-direction based on Hierarchical Markov Model [Volume 34, Issue 2, 2021, Pages 414-426]
-
Chokan, F.
The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
-
Choudhury, S.
Experimental Study on Single Bay Reinforced Coconut Shell Concrete Portal Frame under Lateral and Cyclic Load [Volume 34, Issue 8, 2021, Pages 1905-1912]
-
Choudhury, S.
Modified Damage Index Calculation Method for Frame-Shear Wall Building Considering Multiple Demand Parameters [Volume 34, Issue 10, 2021, Pages 2294-2301]
-
Chrismianto, Deddy
Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
-
Contreras, A.
Objective Functions for the Optimization of an Ultra Wideband Antenna [Volume 34, Issue 7, 2021, Pages 1743-1749]
D
-
Dadashi Haji, M.
The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
-
Dadgar, A.
Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
-
Darabi, A.
An Improvement on Slot Configuration Structure of a Low-Speed Surface-Mounted Permanent Magnet Synchronous Generator with a Wound Cable Winding [Volume 34, Issue 9, 2021, Pages 2045-2052]
-
Darabi, A.
Design and Modeling of a High-Speed Permanent Magnet Synchronous Generator with a Retention Sleeve of Rotor [Volume 34, Issue 11, 2021, Pages 2433-2441]
-
Darezereshki, E.
Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
-
Darvishvand, H.R.
Utilizing the Modified Popovics Model in study of effect of water to cement ratio, size and shape of aggregate in concrete behavior [Volume 34, Issue 2, 2021, Pages 393-402]
-
Davani Motlagh, A.
Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
-
Davari, S.
Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
-
Davarnejad, R.
Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
-
Dehghan, M.
Private Trajectory Intersection Testing: Is Garbled Circuit Better than Custom Protocols? [Volume 34, Issue 4, 2021, Pages 863-872]
-
Delaram, F.
Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
-
Demyanenkob, O.
Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
-
Deo, S. V
Effect of Super absorbent polymer on workability, strength and durability of Self consolidating concrete [Volume 34, Issue 5, 2021, Pages 1118-1123]
-
Derbentsev, V.
Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
-
Desale, G. R.
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
-
Dhouib, S.
Optimization of Travelling Salesman Problem on Single Valued Triangular Neutrosophic Number using Dhouib-Matrix-TSP1 Heuristic [Volume 34, Issue 12, 2021, Pages 2642-2647]
-
Didehvar, N.
Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
-
Dixit, A.
A Compact Model of Gate Capacitance in Ballistic Gate-All-Around Carbon Nanotube Field Effect Transistors [Volume 34, Issue 7, 2021, Pages 1718-1724]
-
Domiri Ganji, Davood
The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
-
Dong, P. V.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Dong, P. V.
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Doost Mohammadi, M.H.
New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
-
Doroudi, A.
A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
-
Drebenstedt, C.
Korkinsk Brown Coal Open Pit as a Case Study of Endogenous Fires [Volume 34, Issue 1, 2021, Pages 293-304]
-
Duc, N. V.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Dung, H. T.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Durali, M.
A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
E
-
E. Babadi, M.
Earthquake prediction modeling using dynamic changes (Case Study: Alborz Region) [Volume 34, Issue 2, 2021, Pages 355-366]
-
Ebadi, A.
A New Simple Method to Avoid Maloperation of Transformer Restricted Earth Fault Relay during External Fault Events [Volume 34, Issue 9, 2021, Pages 2070-2076]
-
Ebrahimi, E.
Effect of Tail Capacitor on Phase Noise in LC Cross-connected Oscillators: An Analytical Investigation [Volume 34, Issue 1, 2021, Pages 110-119]
-
Ebrahimi, M.
Utilizing the Modified Popovics Model in study of effect of water to cement ratio, size and shape of aggregate in concrete behavior [Volume 34, Issue 2, 2021, Pages 393-402]
-
Ebrahimi Saryazdi, S.M.
Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
-
Ebrahimnejad, S.
Proposing a model for a resilient supply chain: A meta-heuristic algorithm [Volume 34, Issue 12, 2021, Pages 2566-2577]
-
E.Ergin, M
Planned Special Event Travel Demand Model Development [Volume 34, Issue 2, 2021, Pages 336-347]
-
Efimova, E. A.
Analysis on Effect of Fullerene Soot on the Chemical and Physical Properties of Cement Mixtures [Volume 34, Issue 10, 2021, Pages 2313-2318]
-
Ehsanian, M.
Fast Grid Voltage Synchronization Using Modified FLL in Single-Phase Grid-Connected Power Systems [Volume 34, Issue 6, 2021, Pages 1430-1437]
-
Elahi, E.
New Model of Burden Thickness Estimation for Blasting of Open Pit Mines [Volume 34, Issue 5, 2021, Pages 1381-1389]
-
Elavenil, S.
Parametric Effects on Slump and Compressive Strength Properties of Geopolymer Concrete using Taguchi Method [Volume 34, Issue 3, 2021, Pages 629-635]
-
El Khouddar, Y.
Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
-
El-Wazery, M. S.
ModeI fracture toughness of Carbon/glass hybrid comopsite [Volume 34, Issue 11, 2021, Pages 2418-2423]
-
Emadi, S.
Services Composition in Multi-cloud Environments using the Skyline Service Algorithm [Volume 34, Issue 1, 2021, Pages 56-65]
-
Emami, N.
Extreme Learning Machine based Pattern Classifiers for Symbolic Interval Data [Volume 34, Issue 11, 2021, Pages 2545-2556]
-
Emamian, S.
Introducing an Enhanced Friction Model for Developing Inertia Welding Simulation: A Computational Solid Mechanics Approach [Volume 34, Issue 3, 2021, Pages 737-743]
-
Enshayi, M.
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Ernawati, L.
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
Esfahanipour, Akbar
Development of open-pit mine reclamation cost estimation models: A regression-based approach [Volume 34, Issue 11, 2021, Pages 2467-2475]
-
Esfandian, H.
Risk Assessment of Gasoline Storage Unit of National Iranian Oil Product Distribution Company using PHAST Software [Volume 34, Issue 4, 2021, Pages 763-768]
-
Esfandian, N.
A Clustering-Based Approach for Features Extraction in Spectro-Temporal Domain Using Artificial Neural Network [Volume 34, Issue 2, 2021, Pages 452-457]
-
Es-haghi, M.S.
Straightforward Prediction for Responses of the Concrete Shear Wall Buildings Subject to Ground Motions Using Machine Learning Algorithms [Volume 34, Issue 7, 2021, Pages 1586-1601]
-
Esmaeili, Q.
Investigating behavior of VLCC ship’s diesel engine on handling stormy waters [Volume 34, Issue 8, 2021, Pages 1845-1855]
-
Esmaeili, S.
Numerical analyses of Manufacturing of an AA8111 Pin-shaped Bipolar Plate by Hot Metal Gas Forming [Volume 34, Issue 8, 2021, Pages 1994-2001]
-
Espitia, L. A.
Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
-
Eswar Kumar, A.
Waviness Effect of Fiber on Buckling Behavior of Sisal/Carbon Nanotube Reinforced Composites Using Experimental Finite Element Method [Volume 34, Issue 12, 2021, Pages 2617-2623]
-
Ethiraj, N.
Experimental and Finite Element Analysis of Single Stage Single Point Incremental Forming [Volume 34, Issue 10, 2021, Pages 2259-2265]
-
Ezoji, M.
Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
-
Ezoji, M.
Deep Convolutional Neural Network for Finger-Knuckle-Print Recognition [Volume 34, Issue 7, 2021, Pages 1684-1693]
-
Ezoji, R.
Synthesis and Characterization of TiO2/CuO/WO3 Ternary Composite and its Application as Photocatalyst [Volume 34, Issue 3, 2021, Pages 721-727]
F
-
Faez, A.
Retrofitting of RC Beams using Reinforced Self-compacting Concrete Jackets Containing Aluminum Oxide Nanoparticles [Volume 34, Issue 5, 2021, Pages 1195-1212]
-
Faiz, J.
Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
-
Fakhrzad, M.B.
A Mathematical Model for a Blood Supply Chain Network with the Robust Fuzzy Possibilistic Programming Approach: A Case Study at Namazi Hospital [Volume 34, Issue 6, 2021, Pages 1493-1502]
-
Faraji, A.
Actuator Fault Detection and Isolation for Helicopter Unmanned Arial Vehicle in the Present of Disturbance [Volume 34, Issue 3, 2021, Pages 676-681]
-
Faraji, A.
Robust Three Stage Central Difference Kalman Filter for Helicopter Unmanned Aerial Vehicle Actuators Fault Estimation [Volume 34, Issue 5, 2021, Pages 1290-1296]
-
Farsi, M. A.
A Continuum Damage Mechanics-based Piecewise Fatigue Damage Model for Fatigue Life Prediction of Fiber-Reinforced Laminated Composites [Volume 34, Issue 6, 2021, Pages 1512-1522]
-
Farughi, H.
Reactive Scheduling Addressing Unexpected Disturbance in Cellular Manufacturing Systems [Volume 34, Issue 1, 2021, Pages 162-170]
-
Farughi, H.
Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
-
Farughi, H.
Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
-
Farzinfar, M.
Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
-
Fasihi, M.
Developing a Bi-objective Mathematical Model to Design the Fish Closed-loop Supply Chain [Volume 34, Issue 5, 2021, Pages 1257-1268]
-
Fatahi, F.
Optimization of Thermal Decomposition Conditions of Bone to Achieve the Highest Percentage of Crystalline Phase in Bone Char using Gene Expression Programming and Artificial Neural Network [Volume 34, Issue 1, 2021, Pages 184-194]
-
Fateh, H.
A Game-Theoretic Approach for Robust Federated Learning [Volume 34, Issue 4, 2021, Pages 832-842]
-
Fattah, M. Y.
Influence of Plastic Fiber on the Geotechnical Properties of Gypseous Soil [Volume 34, Issue 2, 2021, Pages 367-374]
-
Fatthi, P.
A joint optimization model for production scheduling and preventive maintenance interval [Volume 34, Issue 11, 2021, Pages 2508-2516]
-
Fazlali, A.
Investigating the Performance of CO Boiler Burners in the RFCC Unit with CFD Simulation [Volume 34, Issue 3, 2021, Pages 587-597]
-
Fazlollahtabar, H.
A joint optimization model for production scheduling and preventive maintenance interval [Volume 34, Issue 11, 2021, Pages 2508-2516]
-
Feoktystova, O.
Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
-
Firouzeh, Z. H.
Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method [Volume 34, Issue 11, 2021, Pages 2408-2417]
-
Firouzkouhi, H.
Effect of Tail Capacitor on Phase Noise in LC Cross-connected Oscillators: An Analytical Investigation [Volume 34, Issue 1, 2021, Pages 110-119]
-
Fomina, E.
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
G
-
Gabov, V. V.
Evaluating the Efficiency of Coal Loading Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]
-
Gao, J.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Gapsari, F.
Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
-
Gerami, M.
Multi-stage Performance Upgrade of Steel Moment Frames by Post-tension Connections [Volume 34, Issue 5, 2021, Pages 1132-1144]
-
Gerami, M.
Sensitivity Analysis of Behavior of Simple Trapezoidal Steel Plates to Introduce a New Yielding Damper [Volume 34, Issue 10, 2021, Pages 2302-2312]
-
Gerasimov, V. I.
Analysis on Effect of Fullerene Soot on the Chemical and Physical Properties of Cement Mixtures [Volume 34, Issue 10, 2021, Pages 2313-2318]
-
Ghaedrahmat, Z.
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Ghalandarzadeh, M.
A new wide tunability MEMS based variable capacitor using two separate electro-static vertical comb drive actuators [Volume 34, Issue 11, 2021, Pages 2534-2544]
-
Ghamari, H.
The Effects of Mathematical Modelling of Magneto-rheological Dampers on Its Control Performance: A Comparative Study Between the Modified Bouc-Wen and the Maxwell Nonlinear Slider Hysteretic Models [Volume 34, Issue 5, 2021, Pages 1105-1117]
-
Ghanbari Sorkhi, A.
Prediction of Drug-Target Protein Interaction Based on the Minimization of Weighted Nuclear Norm and Similarity Graph between Drugs and Target Proteins [Volume 34, Issue 7, 2021, Pages 1736-1742]
-
Ghapanvary, M. A.
Dynamic Response Analysis of a High Glide Ratio Parachute System [Volume 34, Issue 1, 2021, Pages 195-201]
-
Gharehpetian, G. B.
Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
-
Ghasemi, M.
A Three-stage Filtering Approach for Face Recognition [Volume 34, Issue 8, 2021, Pages 1856-1864]
-
Ghasemi, R.
Determining the Optimal Maintenance Strategy for Ammonium Hydroxide Production Unit Using Risk-Based Inspection and Analytic Hierarchy Process [Volume 34, Issue 9, 2021, Pages 2087-2096]
-
Ghasemi, Z.
Determining the Optimal Maintenance Strategy for Ammonium Hydroxide Production Unit Using Risk-Based Inspection and Analytic Hierarchy Process [Volume 34, Issue 9, 2021, Pages 2087-2096]
-
Ghasemzadeh, M.
The Predictability of Tree-based Machine Learning Algorithms in the Big Data Context [Volume 34, Issue 1, 2021, Pages 82-89]
-
Ghasemzadeh, M.
The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
-
Ghazi-Maghrebi, S.
A General Framework for Estimating Channel of Orthogonal Frequency Division Multiplexing Systems by Utilizing Sparse Representation [Volume 34, Issue 6, 2021, Pages 1475-1485]
-
Ghods, M.
Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
-
Gholami, A.
Investigating behavior of VLCC ship’s diesel engine on handling stormy waters [Volume 34, Issue 8, 2021, Pages 1845-1855]
-
Gholami, M.
Designing Bi-directional Counters Using Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 4, 2021, Pages 901-907]
-
Gholami, M.
Using Universal Nand-nor-inverter Gate to Design D-latch and D Flip-flop in Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 7, 2021, Pages 1710-1717]
-
Gholami, P.
Reliability Analysis of Notched Plates under Anisotropic Damage Based on Uniaxial Loading Using Continuum Damage Mechanics Approach [Volume 34, Issue 1, 2021, Pages 253-262]
-
Gholami, P.
A Continuum Damage Mechanics-based Piecewise Fatigue Damage Model for Fatigue Life Prediction of Fiber-Reinforced Laminated Composites [Volume 34, Issue 6, 2021, Pages 1512-1522]
-
Gholamipour, R.
Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
-
Gholizadeh, S,
Robust Design of Reinforced Concrete Moment-Resisting Frames [Volume 34, Issue 10, 2021, Pages 2238-2247]
-
Gholizade Narm, H.
Bandwidth Management with Congestion Control Approach and Fuzzy Logic [Volume 34, Issue 4, 2021, Pages 891-900]
-
Ghorbankhan, A. Ghorbankhan
Microstructure and mechanical properties of PA6/NBR nanocomposites fabricated by friction stir processing [Volume 34, Issue 10, 2021, Pages 2371-2378]
-
Ghoreishian, F.
An Improved Modeling of Parkinson’s Tremor and Investigation of Some Approaches to Remove this Symptom [Volume 34, Issue 5, 2021, Pages 1269-1273]
-
Gokul, G.
Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
-
Goodarzian Urimi, M.
Risk Assessment of Gasoline Storage Unit of National Iranian Oil Product Distribution Company using PHAST Software [Volume 34, Issue 4, 2021, Pages 763-768]
-
Govindaraju, M.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Graciano-Uribe, J.
Control of Steel Detachment and Metal Flow on Aluminum-Steel Friction Stir Welding of thin Joints [Volume 34, Issue 4, 2021, Pages 1024-1034]
-
G. Taleghani, H.
Efficient Removal of Copper Ion from Aqueous Solution using Crosslinked Chitosan Grafted with Polyaniline [Volume 34, Issue 2, 2021, Pages 305-312]
-
Gunasekaran, K.
Experimental Study on Single Bay Reinforced Coconut Shell Concrete Portal Frame under Lateral and Cyclic Load [Volume 34, Issue 8, 2021, Pages 1905-1912]
-
Gunasekaran, N.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Gunawan, H.
A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
-
Guo, L.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Gupta, A.V. S. S. K. S.
Study of the Fracture Behavior under the Effect of Cross-ply and Angle-ply Arrangement of FRP Composite Laminate Subjected to Central Circular Cut-out with Mechanical and Thermal Loading Conditions [Volume 34, Issue 6, 2021, Pages 1523-1529]
-
Gupta, N.
A Compact Model of Gate Capacitance in Ballistic Gate-All-Around Carbon Nanotube Field Effect Transistors [Volume 34, Issue 7, 2021, Pages 1718-1724]
-
Gupta, P. K.
Intrusion Detection in Cyber-Physical Layer of Smart Grid Using Intelligent Loop Based Artificial Neural Network Technique [Volume 34, Issue 5, 2021, Pages 1250-1256]
-
Gupta, P.
Dual Output Voltage Differencing Buffered Amplifier Based Active -C Multiphase Sinusoidal Oscillator [Volume 34, Issue 6, 2021, Pages 1438-1444]
-
Gupta, P.
Operating Wheelchair Using Flex Sensor [Volume 34, Issue 7, 2021, Pages 1703-1709]
-
Gupta, S.
Orthotropic Coefficients and Continuity Factors of Reinforced Concrete Slabs Supported on 3-sides [Volume 34, Issue 2, 2021, Pages 375-381]
-
Gupta, V.
Carbon Nanotube Field Effect Transistors Based Digitally Reconfigurable Single Differential Voltage Current Conveyor based Analog Biquadratic Multifunctional Filter at 32nm Technology Node [Volume 34, Issue 11, 2021, Pages 2424-2432]
-
Guzev, M. A.
Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
H
-
Habibi, M.
Splicing Image Forgery Detection and Localization Based on Color Edge Inconsistency using Statistical Dispersion Measures [Volume 34, Issue 2, 2021, Pages 443-451]
-
Habibi, M.
Improvement of Multi-agent Routing Guidance with an Intelligent Traffic Light Scheduling and the Ability to Select Intermediate Destinations [Volume 34, Issue 4, 2021, Pages 854-862]
-
Hadiyoso, S.
Epileptic Electroencephalogram Classification using Relative Wavelet Sub-Band Energy and Wavelet Entropy [Volume 34, Issue 1, 2021, Pages 75-81]
-
Haghzad Klidbary, S.
Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
-
Hajiaghaei-Keshteli, M.
Developing a Bi-objective Mathematical Model to Design the Fish Closed-loop Supply Chain [Volume 34, Issue 5, 2021, Pages 1257-1268]
-
Haji Sheik Mohammed, M. S.
Study of Bond Strength of Plain Surface Wave Type Configuration Rebars with Concrete: A Comparative Study [Volume 34, Issue 2, 2021, Pages 326-335]
-
Hajsadeghi, M.
Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
-
Haj Seiyed Taghia, S.A
Utilizing the Modified Popovics Model in study of effect of water to cement ratio, size and shape of aggregate in concrete behavior [Volume 34, Issue 2, 2021, Pages 393-402]
-
Hallajisani, A.
Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
-
Hamidi, H.
Effect of Sensory Experience on Customer Word-of-mouth Intention, Considering the Roles of Customer Emotions, Satisfaction, and Loyalty [Volume 34, Issue 3, 2021, Pages 682-699]
-
Hamidi, H.
Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
-
Hamidi, H.
Effect of motivation, opportunity and ability on human resources information security management considering the roles of Attitudinal, behavioral and organizational factors [Volume 34, Issue 12, 2021, Pages 2624-2635]
-
Hammachukiattikul, P.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Handikherkar, V. C.
Gear Fault Detection using Machine Learning Techniques- A Simulation-driven Approach [Volume 34, Issue 1, 2021, Pages 212-223]
-
Harounabadi, A.
Improvement of Multi-agent Routing Guidance with an Intelligent Traffic Light Scheduling and the Ability to Select Intermediate Destinations [Volume 34, Issue 4, 2021, Pages 854-862]
-
Hasani, A.
Utilization of Gene Expression Programming for Modeling of Mechanical Performance of Titanium/Carbonated Hydroxyapatite Nanobiocomposites: The Combination of Artificial Intelligence and Material Science [Volume 34, Issue 4, 2021, Pages 948-955]
-
Hasanzadeh, R.
Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
-
Hasanzadeh, R. P. R.
Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
-
Hashemi, S.M.R.
Prediction of Drug-Target Protein Interaction Based on the Minimization of Weighted Nuclear Norm and Similarity Graph between Drugs and Target Proteins [Volume 34, Issue 7, 2021, Pages 1736-1742]
-
HashemiRafsanjani, S.H.
A General Framework for Estimating Channel of Orthogonal Frequency Division Multiplexing Systems by Utilizing Sparse Representation [Volume 34, Issue 6, 2021, Pages 1475-1485]
-
Hashempour, M.
Essential Improvements in Gypsum Mortar Characteristics [Volume 34, Issue 2, 2021, Pages 319-325]
-
Hassani Joshaghani, A.
Photo-degradation of P-Nitro Toluene Using Modified Bentonite Based Nano-TiO2 Photocatalyst in Aqueous Solution [Volume 34, Issue 4, 2021, Pages 756-762]
-
Hassanpour, H.
Splicing Image Forgery Detection and Localization Based on Color Edge Inconsistency using Statistical Dispersion Measures [Volume 34, Issue 2, 2021, Pages 443-451]
-
Hassanpour, H.
Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
-
Hassanpour, H.
Fast Grid Voltage Synchronization Using Modified FLL in Single-Phase Grid-Connected Power Systems [Volume 34, Issue 6, 2021, Pages 1430-1437]
-
Hassanpour, H.
A Signal Processing Method for Text Language Identification [Volume 34, Issue 6, 2021, Pages 1413-1418]
-
Hassanpour, H.
Sensitivity Analysis on Thermal Performance of Gas Heater with Finned and Finless Tubes using Characteristics-based Method [Volume 34, Issue 6, 2021, Pages 1537-1544]
-
Hassanpour, H.
A Three-stage Filtering Approach for Face Recognition [Volume 34, Issue 8, 2021, Pages 1856-1864]
-
Hassanpour, H.
A Two-Level Semi-supervised Clustering Technique for News Articles [Volume 34, Issue 12, 2021, Pages 2648-2657]
-
Hassanpour, P.
Statistical Modeling, Optimization and Sensitivity Analysis of Tool’s Geometrical Parameters on Process Force in Automatic Cortical Bone Drilling Process [Volume 34, Issue 2, 2021, Pages 528-535]
-
Hassanzadeh Nemati, N.
Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
-
Heeralal, M.
Soil Shrinkage Characterization of Low Plasticity Soil Using Digital Image Analysis Process [Volume 34, Issue 10, 2021, Pages 2206-2212]
-
Heidari, A.
Essential Improvements in Gypsum Mortar Characteristics [Volume 34, Issue 2, 2021, Pages 319-325]
-
Heidari, M.
Services Composition in Multi-cloud Environments using the Skyline Service Algorithm [Volume 34, Issue 1, 2021, Pages 56-65]
-
Heidarzad Moghaddam, H.
Durability and Mechanical Properties of Self-compacting Concretes with Combined Use of Aluminium Oxide Nanoparticles and Glass Fiber [Volume 34, Issue 1, 2021, Pages 26-38]
-
Hekmati, A.
Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
-
Hemalatha, G.
Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
-
Hemalatha, G.
A Novel Lightweight Phase-changing Cooling Roof Tile [Volume 34, Issue 6, 2021, Pages 1398-1406]
-
Heydari. T, A.M.
Multi-stage Performance Upgrade of Steel Moment Frames by Post-tension Connections [Volume 34, Issue 5, 2021, Pages 1132-1144]
-
Hidayatia, N. A.
Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
-
Hoseini, M. H.
Physical Modelling of a Strip Footing on a Geosynthetic Reinforced Soil Wall Containing Tire Shred Subjected to Monotonic and Cyclic Loading [Volume 34, Issue 10, 2021, Pages 2266-2279]
-
Hosseini, M.
Sensitivity Analysis of Behavior of Simple Trapezoidal Steel Plates to Introduce a New Yielding Damper [Volume 34, Issue 10, 2021, Pages 2302-2312]
-
Hosseini, M.R.
Effect of Critical Variables on Air Dense Medium Fluidized Bed Coal Drying Efficiency and Kinetics [Volume 34, Issue 5, 2021, Pages 1362-1370]
-
Hosseini, S.A
The Effect of Stochastic Properties of Strength Reduction Function on The Time-Dependent Reliability of RC Structures [Volume 34, Issue 2, 2021, Pages 572-580]
-
Hosseini, S. M.
A New Simple Method to Avoid Maloperation of Transformer Restricted Earth Fault Relay during External Fault Events [Volume 34, Issue 9, 2021, Pages 2070-2076]
-
Hosseinipour, S.J.
Multi-objective Optimization of HMGF Process Parameters for Manufacturing AA6063 Stepped Tubes using FEM-RSM [Volume 34, Issue 5, 2021, Pages 1305-1312]
-
Hosseinipour, S.J.
Numerical analyses of Manufacturing of an AA8111 Pin-shaped Bipolar Plate by Hot Metal Gas Forming [Volume 34, Issue 8, 2021, Pages 1994-2001]
-
Hosseinnejad, H.
Numerical Investigation of Response of the Post-Tensioned Tapered Steel Beams with Shape Memory Alloy Tendons [Volume 34, Issue 4, 2021, Pages 782-792]
-
HosseinNia, S. H.
Novel Particle Swarm Optimization Algorithm Based on President Election: Applied to a Renewable Hybrid Power System Controller [Volume 34, Issue 1, 2021, Pages 97-109]
-
Hosseinpour, K.
A Clustering-Based Approach for Features Extraction in Spectro-Temporal Domain Using Artificial Neural Network [Volume 34, Issue 2, 2021, Pages 452-457]
-
Hosseinzadeh, N.
A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
-
Hosseinzadeh, Y.
Numerical Investigation of Response of the Post-Tensioned Tapered Steel Beams with Shape Memory Alloy Tendons [Volume 34, Issue 4, 2021, Pages 782-792]
-
Hosseinzadeh Lotfi, F.
Provision of an Optimal Strategy to Forecast the Prices Set by the Electricity Market in the Competitive Iranian Energy Market in Fall [Volume 34, Issue 1, 2021, Pages 149-161]
-
Humphries, U.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Hung, T. Q.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Hussein, A. A.
Effect of Hydrodynamic Pressure on Saturated Sand Supporting Liquid Storage Tank During the Earthquake [Volume 34, Issue 5, 2021, Pages 1176-1183]
-
Hussein, M. N.
Experimental and Nonlinear Analysis of Cracking in Concrete Arch Dams Due to Seismic Uplift Pressure Variations [Volume 34, Issue 5, 2021, Pages 1156-1166]
I
-
Ihsan, E. A.
Influence of Plastic Fiber on the Geotechnical Properties of Gypseous Soil [Volume 34, Issue 2, 2021, Pages 367-374]
-
Ilin, I. V.
System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
-
Ilman, M. N.
Effect of Pin Geometry and Tool Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Spot Welded Joints in AA2024-O Aluminum Alloy [Volume 34, Issue 8, 2021, Pages 1949-1960]
-
Imani, Z.
Deep Convolutional Neural Network for Finger-Knuckle-Print Recognition [Volume 34, Issue 7, 2021, Pages 1684-1693]
-
Imani, Z.
Holistic Persian Handwritten Word Recognition Using Convolutional Neural Network [Volume 34, Issue 8, 2021, Pages 2028-2037]
-
Imran, A.
Carbon Nanotube Field Effect Transistors Based Digitally Reconfigurable Single Differential Voltage Current Conveyor based Analog Biquadratic Multifunctional Filter at 32nm Technology Node [Volume 34, Issue 11, 2021, Pages 2424-2432]
-
Iqbal, Z.
Concepts, Key Challenges and Open Problems of Federated Learning [Volume 34, Issue 7, 2021, Pages 1667-1683]
-
Iqhrammullah, M.
Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
-
Iranpour Mobarakeh, M.
Prediction of Drug-Target Protein Interaction Based on the Minimization of Weighted Nuclear Norm and Similarity Graph between Drugs and Target Proteins [Volume 34, Issue 7, 2021, Pages 1736-1742]
-
Irawati, I. D.
Epileptic Electroencephalogram Classification using Relative Wavelet Sub-Band Energy and Wavelet Entropy [Volume 34, Issue 1, 2021, Pages 75-81]
-
Ismael, M. A.
Structural Behavior of Hollow-core One Way Slabs of High Strength Self-compacting Concrete [Volume 34, Issue 1, 2021, Pages 39-45]
J
-
Jaafarzadeh, N.
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Jabbar Hassan, A.
Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
-
Jabbari, E.
Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
-
Jafari, V.
A Study of Blast–Induced Vibration on Oil Pipelines based on Numerical and Field Analysis [Volume 34, Issue 9, 2021, Pages 2116-2123]
-
Jafari-Nodoushan, Abbasali
A Mathematical Model for a Blood Supply Chain Network with the Robust Fuzzy Possibilistic Programming Approach: A Case Study at Namazi Hospital [Volume 34, Issue 6, 2021, Pages 1493-1502]
-
Jafarmadar, S.
Experimental Investigation on the Effect a Rotational Shaft on the Thermal Behavior of a Circular Tube under Constant Heat Flux [Volume 34, Issue 4, 2021, Pages 1008-1015]
-
Jahanian, O.
Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds [Volume 34, Issue 9, 2021, Pages 2137-2147]
-
Jahanshahi, M.
Improving the Load Balancing and Dynamic Placement of Virtual Machines in Cloud Computing using Particle Swarm Optimization Algorithm [Volume 34, Issue 6, 2021, Pages 1419-1429]
-
Jalali, A.
Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
-
Jalali, A.
Evaluating the effect of Buckling-Restrained Braces in Steel Buildings against Progressive failure using Different Simulation Strategies [Volume 34, Issue 10, 2021, Pages 2248-2258]
-
Jalali, M.
Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
-
Jalali, M.
Performance of Reinforced Concrete Shear Wall Equipped with an Innovative Hybrid Damper [Volume 34, Issue 7, 2021, Pages 1632-1643]
-
Jalilehvand, M.
Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
-
Jamali, N.
Adpative Neuro-Fuzzy Inference System Estimation Propofol dose in the induction phase during anesthesia; case study [Volume 34, Issue 9, 2021, Pages 2148-2156]
-
Jamasri, J.
Experimental Study of Polyvinyl Alcohol Nanocomposite Film Reinforced by Cellulose Nanofibers from Agave Cantala [Volume 34, Issue 4, 2021, Pages 987-998]
-
Jamshidi Aval, H.
Multi-objective Optimization of HMGF Process Parameters for Manufacturing AA6063 Stepped Tubes using FEM-RSM [Volume 34, Issue 5, 2021, Pages 1305-1312]
-
Jamuna Rani, G
Experimental Study on Yttria Stabilized and Titanium Oxide Thermal Barrier Coated Piston Effect on Engine Performance and Emission Characteristics [Volume 34, Issue 12, 2021, Pages 2611-2616]
-
Jatti, V. S.
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Javadian, M.
Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
-
Javid, A.H.
Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
-
Javidi, M. M.
Energy-aware task scheduling in cloud compting based on discrete pathfinder algorithm [Volume 34, Issue 9, 2021, Pages 2124-2136]
-
Jazayeri, S.A.
Investigating behavior of VLCC ship’s diesel engine on handling stormy waters [Volume 34, Issue 8, 2021, Pages 1845-1855]
-
Jithendra, C.
Parametric Effects on Slump and Compressive Strength Properties of Geopolymer Concrete using Taguchi Method [Volume 34, Issue 3, 2021, Pages 629-635]
-
Johari, M. S.
Novel Particle Swarm Optimization Algorithm Based on President Election: Applied to a Renewable Hybrid Power System Controller [Volume 34, Issue 1, 2021, Pages 97-109]
-
Jokardarabi, Mohammad
A Mathematical Model for a Blood Supply Chain Network with the Robust Fuzzy Possibilistic Programming Approach: A Case Study at Namazi Hospital [Volume 34, Issue 6, 2021, Pages 1493-1502]
-
Jongvivatsakul, P.
Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
K
-
Kadhim, M. J.
Experimental and Nonlinear Analysis of Cracking in Concrete Arch Dams Due to Seismic Uplift Pressure Variations [Volume 34, Issue 5, 2021, Pages 1156-1166]
-
Kadhum, M. M.
Comparative Study on Structural Behavior of Reinforced Concrete Straight Beam and Beams with out of Plane Parts [Volume 34, Issue 10, 2021, Pages 2280-2293]
-
Kadivar, M. H.
Seismic Analysis of Double Deck Floating Roofs of Siraf Storage Tanks with Condensate, Light and Heavy Crude Oils [Volume 34, Issue 10, 2021, Pages 2319-2331]
-
Kadkhodayan, M.
Ratcheting Analysis of Steel Plate under Cycling Loading using Dynamic Relaxation Method Experimentally Validated [Volume 34, Issue 6, 2021, Pages 1530-1536]
-
Kaewkuekool, S.
The Rejuvenation Heat Treatment of Nickel Base Superalloy Grade GTD111 after Long-Term Service via the Taguchi Method for Optimization [Volume 34, Issue 4, 2021, Pages 956-965]
-
Kaewmesri, P.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Kafi Hernashki, R.
Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
-
Kahrobaee, S.
Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
-
Kakha, G. H.
An Application of Fuzzy-VIKOR Method in Environmental Impact Assessment of the Boog Mine Southeast of Iran [Volume 34, Issue 6, 2021, Pages 1545-1556]
-
Kapoor, R.
Human Action Recognition using Prominent Camera [Volume 34, Issue 2, 2021, Pages 427-432]
-
Karami Mohammadi, R.
The Effects of Mathematical Modelling of Magneto-rheological Dampers on Its Control Performance: A Comparative Study Between the Modified Bouc-Wen and the Maxwell Nonlinear Slider Hysteretic Models [Volume 34, Issue 5, 2021, Pages 1105-1117]
-
Karimi, J.
Dynamic Response Analysis of a High Glide Ratio Parachute System [Volume 34, Issue 1, 2021, Pages 195-201]
-
Karimpour, S.R.
Multi-objective optimization design and Verification of Interior PMSG Based on Finite Element Analysis and Taguchi method [Volume 34, Issue 9, 2021, Pages 2097-2106]
-
Kavimandan, P. Sh.
Human Action Recognition using Prominent Camera [Volume 34, Issue 2, 2021, Pages 427-432]
-
Kavoosi Davoodi, S. M.
Provision of an Optimal Strategy to Forecast the Prices Set by the Electricity Market in the Competitive Iranian Energy Market in Fall [Volume 34, Issue 1, 2021, Pages 149-161]
-
Kazemi, M.G.
A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
-
Kazemi, M.H.
A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
-
Kazemi, S.
Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
-
Keawsawasvong, S.
Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
-
Keshavarz, M.
A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
-
Khadirnaikar, R. B.
Flexural Strength and Behavioral Study of High-Performance Concrete Beams using Stress-Block Parameters [Volume 34, Issue 11, 2021, Pages 2557-2565]
-
Khakpour, Z.
Synthesis and Characterization of Photocatalytic Activity of Hematite/ Cobalt Oxide/ Graphite Nanocomposites [Volume 34, Issue 1, 2021, Pages 177-183]
-
Khan, H.
Mitigation of Spectrum Sensing Data Falsification Attack in Cognitive Radio Networks using Trust Based Cooperative Sensing [Volume 34, Issue 6, 2021, Pages 1468-1474]
-
Khanabdal, S.
A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
-
Khanjani, J.
Efficient Removal of Copper Ion from Aqueous Solution using Crosslinked Chitosan Grafted with Polyaniline [Volume 34, Issue 2, 2021, Pages 305-312]
-
Khatami, H.
Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
-
Khayati, G. R.
Optimization of Thermal Decomposition Conditions of Bone to Achieve the Highest Percentage of Crystalline Phase in Bone Char using Gene Expression Programming and Artificial Neural Network [Volume 34, Issue 1, 2021, Pages 184-194]
-
Khayati, G.R.
Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
-
Khayati, G.R.
Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
-
Khayati, G.R.
Utilization of Gene Expression Programming for Modeling of Mechanical Performance of Titanium/Carbonated Hydroxyapatite Nanobiocomposites: The Combination of Artificial Intelligence and Material Science [Volume 34, Issue 4, 2021, Pages 948-955]
-
Khazaei Feizabad, M.H.
Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
-
Khorasani, S.M.J
Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
-
Khorasani, S.M.J.
Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
-
Khorsandijou, S.M.
Effects of Road Roughness, Aerodynamics, and Weather Conditions on Automotive Wheel Force [Volume 34, Issue 2, 2021, Pages 536-546]
-
Khosravian, E.
Private Trajectory Intersection Testing: Is Garbled Circuit Better than Custom Protocols? [Volume 34, Issue 4, 2021, Pages 863-872]
-
Khosrogorji, S.
Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
-
Khrustalev, K.
Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
-
Khrustalova, S.
Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
-
Khudhaire, H. Y.
Management of Abandoned Construction Projects in Iraq Using BIM Technology [Volume 34, Issue 3, 2021, Pages 644-649]
-
Kiran, K. K.
Blast Demand Estimation of RC-Moment-Resisting Frames using a Proposed Multi-modal Adaptive Pushover Analysis Procedure [Volume 34, Issue 1, 2021, Pages 46-55]
-
Kohestani, H.
Synthesis and Characterization of TiO2/CuO/WO3 Ternary Composite and its Application as Photocatalyst [Volume 34, Issue 3, 2021, Pages 721-727]
-
Kohli, N.
Prolong Stability Period in Node Pairing Protocol for Wireless Sensor Networks [Volume 34, Issue 12, 2021, Pages 2679-2687]
-
Kouchakzadeh, Mohammad Ali
A Continuum Damage Mechanics-based Piecewise Fatigue Damage Model for Fatigue Life Prediction of Fiber-Reinforced Laminated Composites [Volume 34, Issue 6, 2021, Pages 1512-1522]
-
Kouhestanian, H.
Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
-
Kovalchuk, V. S.
Analysis on Effect of Fullerene Soot on the Chemical and Physical Properties of Cement Mixtures [Volume 34, Issue 10, 2021, Pages 2313-2318]
-
Kozhevnikov, E. V.
Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
-
Krishnakumar, S.
Fast Color Straight Line Pattern Recognition in an Object Using High Speed Self Learning Devices [Volume 34, Issue 5, 2021, Pages 1225-1232]
-
Kuchaki Rafsanjani, M.
Extreme Learning Machine based Pattern Classifiers for Symbolic Interval Data [Volume 34, Issue 11, 2021, Pages 2545-2556]
-
Kumar Mandal, N.
Design of Area Efficient Single Bit Comparator Circuit using Quantum dot Cellular Automata and its Digital Logic Gates Realization [Volume 34, Issue 12, 2021, Pages 2672-2678]
-
Kusmono, K.
Effect of Pin Geometry and Tool Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Spot Welded Joints in AA2024-O Aluminum Alloy [Volume 34, Issue 8, 2021, Pages 1949-1960]
-
Kusmono, K.
Effects of cold rolling and annealing time on fatigue resistance of AA5052 aluminum alloy [Volume 34, Issue 9, 2021, Pages 2189-2197]
-
Kusumaatmaja, A.
Experimental Study of Polyvinyl Alcohol Nanocomposite Film Reinforced by Cellulose Nanofibers from Agave Cantala [Volume 34, Issue 4, 2021, Pages 987-998]
L
-
Labibi, H.
Sensitivity Analysis of Behavior of Simple Trapezoidal Steel Plates to Introduce a New Yielding Damper [Volume 34, Issue 10, 2021, Pages 2302-2312]
-
Lapthorn, A.
Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
-
Larijani, M. M.
Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
-
Lashgari, V. A.
New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
-
Latif Shabgahi, Gh.
A Novel Method for Forecasting Surface Wind Speed using Wind-direction based on Hierarchical Markov Model [Volume 34, Issue 2, 2021, Pages 414-426]
-
Li, C.
The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
-
Ligotsky, D. N.
Exploration of Rhenium Volcanogenic Deposit and Technology of Its Development [Volume 34, Issue 4, 2021, Pages 1052-1065]
-
Linh, N. K.
Evaluating the Efficiency of Coal Loading Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]
-
Lotfi, M. M.
Adpative Neuro-Fuzzy Inference System Estimation Propofol dose in the induction phase during anesthesia; case study [Volume 34, Issue 9, 2021, Pages 2148-2156]
-
Lotfi, S.
The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
-
Lotfollahi -Yaghin, M.
Numerical Investigation of Response of the Post-Tensioned Tapered Steel Beams with Shape Memory Alloy Tendons [Volume 34, Issue 4, 2021, Pages 782-792]
-
Lotfollahi-Yaghin, M. A.
Durability and Mechanical Properties of Self-compacting Concretes with Combined Use of Aluminium Oxide Nanoparticles and Glass Fiber [Volume 34, Issue 1, 2021, Pages 26-38]
-
Lotfollahi-Yaghin, M.A.
Strengthening of RC Beams Using SCC Jacket Consisting of Glass Fiber and Fiber-Silica Fume Composite Gel [Volume 34, Issue 8, 2021, Pages 1923-1939]
-
Lubis, S.
Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
-
Ly, N. T.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Ly, N. T.
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Lyba, V.
Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
-
Lykov, Y. V.
Evaluating the Efficiency of Coal Loading Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]
M
-
Ma, J.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Madhkhan, M.
Mechanical Properties of Ultra-high Performance Concrete Reinforced by Glass Fibers under Accelerated Aging [Volume 34, Issue 5, 2021, Pages 1074-1084]
-
Maghsoudipour, A.
Synthesis and Characterization of Photocatalytic Activity of Hematite/ Cobalt Oxide/ Graphite Nanocomposites [Volume 34, Issue 1, 2021, Pages 177-183]
-
Mahajan, V.
Intrusion Detection in Cyber-Physical Layer of Smart Grid Using Intelligent Loop Based Artificial Neural Network Technique [Volume 34, Issue 5, 2021, Pages 1250-1256]
-
Mahdavi, A.
Multi objective optimization of multi-hole orifices using FSI analysis and NSGA II algorithm [Volume 34, Issue 8, 2021, Pages 2038-2044]
-
Mahdi, A. A.
Structural Behavior of Hollow-core One Way Slabs of High Strength Self-compacting Concrete [Volume 34, Issue 1, 2021, Pages 39-45]
-
Mahdian Dehkordi, N.
A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
-
Mahini, S.S
The Effect of Stochastic Properties of Strength Reduction Function on The Time-Dependent Reliability of RC Structures [Volume 34, Issue 2, 2021, Pages 572-580]
-
Mahmood, M. S.
Numerical Evaluation of Slope Stability for Construction and Seismic Loads: Case Study [Volume 34, Issue 7, 2021, Pages 1602-1610]
-
Mahmood, M. S.
Effect of Matric Suction on Deformation of Gypseous Sand Using Modified Oedometer [Volume 34, Issue 12, 2021, Pages 2636-2641]
-
Mahmoodi, A.
Price and service competition between two leader-follower retailer-Stackelberg supply chains [Volume 34, Issue 8, 2021, Pages 1982-1993]
-
Mahmoodian, A.
A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
-
Mahmoudi, M.
A Numerical Study of the Effect of Tunneling on Surface Settlement and Existing Buildings [Volume 34, Issue 5, 2021, Pages 1085-1093]
-
Maleki, A.
Durability and Mechanical Properties of Self-compacting Concretes with Combined Use of Aluminium Oxide Nanoparticles and Glass Fiber [Volume 34, Issue 1, 2021, Pages 26-38]
-
Maleki, A.
Numerical Investigation of Response of the Post-Tensioned Tapered Steel Beams with Shape Memory Alloy Tendons [Volume 34, Issue 4, 2021, Pages 782-792]
-
Maleki, A.
Strengthening of RC Beams Using SCC Jacket Consisting of Glass Fiber and Fiber-Silica Fume Composite Gel [Volume 34, Issue 8, 2021, Pages 1923-1939]
-
Manei, S.
Retrofitting of RC Beams using Reinforced Self-compacting Concrete Jackets Containing Aluminum Oxide Nanoparticles [Volume 34, Issue 5, 2021, Pages 1195-1212]
-
Mansouri, A.
Effect of Segregation on Opinion Formation in Scale-Free Social Networks: An Agent-based Approach [Volume 34, Issue 1, 2021, Pages 66-74]
-
Mansouri, F
Synthesis and Characterization of Photocatalytic Activity of Hematite/ Cobalt Oxide/ Graphite Nanocomposites [Volume 34, Issue 1, 2021, Pages 177-183]
-
Mansouri, N.
Energy-aware task scheduling in cloud compting based on discrete pathfinder algorithm [Volume 34, Issue 9, 2021, Pages 2124-2136]
-
Maram, G.
Experimental Investigation of TIG Welding Input Parameters Effects on Mechanical Characteristics [Volume 34, Issue 2, 2021, Pages 564-571]
-
Marandi, S.M.
Large-Scale Experimental Study on Collapsible Soil Improvement Using Encased Stone Columns [Volume 34, Issue 5, 2021, Pages 1145-1155]
-
Marchenko, R. S.
System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
-
Marchione, F.
Analytical Stress Analysis in Single-lap Adhesive Joints under Buckling [Volume 34, Issue 2, 2021, Pages 313-318]
-
Marchione, F.
Enhancement of Stiffness in GFRP Beams by Glass Reinforcement [Volume 34, Issue 3, 2021, Pages 615-620]
-
Marchione, F.
FE analysis of single-lap adhesive joints with tapered adherends [Volume 34, Issue 10, 2021, Pages 2213-2218]
-
Marignetti, F.
Evaluation of Linear Permanent Magnet Vernier Machine Topologies for Wave Energy Converters [Volume 34, Issue 2, 2021, Pages 403-413]
-
Martynyuk, V. V.
Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]
-
Mashayekhi, H.
A Two-Level Semi-supervised Clustering Technique for News Articles [Volume 34, Issue 12, 2021, Pages 2648-2657]
-
Mazaheri, H.
Photo-degradation of P-Nitro Toluene Using Modified Bentonite Based Nano-TiO2 Photocatalyst in Aqueous Solution [Volume 34, Issue 4, 2021, Pages 756-762]
-
Medhlom, M. K.
Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
-
Mehrabiyan, M.
Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
-
Memariani, A.
A Bi-level Programming Approach for Pre-positioning Emergency Warehouses [Volume 34, Issue 1, 2021, Pages 128-139]
-
Menghani, J.
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
-
Menghani, J. V.
Dry sliding behavior of carbon-based brake pad materials [Volume 34, Issue 11, 2021, Pages 2517-2524]
-
Menhaj, M.B.
A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
-
Mergu, K.
Mitigation of Spectrum Sensing Data Falsification Attack in Cognitive Radio Networks using Trust Based Cooperative Sensing [Volume 34, Issue 6, 2021, Pages 1468-1474]
-
Meyghani, B.
Introducing an Enhanced Friction Model for Developing Inertia Welding Simulation: A Computational Solid Mechanics Approach [Volume 34, Issue 3, 2021, Pages 737-743]
-
Mibang, D.
Modified Damage Index Calculation Method for Frame-Shear Wall Building Considering Multiple Demand Parameters [Volume 34, Issue 10, 2021, Pages 2294-2301]
-
Minh, N. D.
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Mir, B.A.
Mechanical Behaviour of Nano-material (Al2O3) Stabilized Soft Soil [Volume 34, Issue 3, 2021, Pages 636-643]
-
Mirabedi, S. M. M.
A Study of Blast–Induced Vibration on Oil Pipelines based on Numerical and Field Analysis [Volume 34, Issue 9, 2021, Pages 2116-2123]
-
Mirabootalebi, S.O
Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
-
Mirhoseini, S.Mohammad
Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
-
Mirhosseini, N.
Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
-
Mirhosseini, S.M.
Evaluating the effect of Buckling-Restrained Braces in Steel Buildings against Progressive failure using Different Simulation Strategies [Volume 34, Issue 10, 2021, Pages 2248-2258]
-
Mirhosseini Moghadam, M.
Stability Analysis of AC/DC Microgrids in Island Mode [Volume 34, Issue 7, 2021, Pages 1750-1765]
-
Mirimani, S.M.
Multi-objective optimization design and Verification of Interior PMSG Based on Finite Element Analysis and Taguchi method [Volume 34, Issue 9, 2021, Pages 2097-2106]
-
Miroshnichenko, N.
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Miroud, D.
Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
-
Mirzaie, I.
Experimental Investigation on the Effect a Rotational Shaft on the Thermal Behavior of a Circular Tube under Constant Heat Flux [Volume 34, Issue 4, 2021, Pages 1008-1015]
-
Mirzarezaee, M.
The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
-
Mobadersani, F.
Magnetohydrodynamic (MHD) Flow in a Channel Including a Rotating Cylinder [Volume 34, Issue 1, 2021, Pages 224-233]
-
Mohagheghpour, E.
Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
-
Mohamad, D.
Soft System Methodology: Project vs Local Community Interests in Project Social Conflict [Volume 34, Issue 9, 2021, Pages 2107-2115]
-
Mohammadi, M.
A Signal Processing Method for Text Language Identification [Volume 34, Issue 6, 2021, Pages 1413-1418]
-
Mohammadi, S.
A Hybrid Modified Grasshopper Optimization Algorithm and Genetic Algorithm to Detect and Prevent DDoS Attacks [Volume 34, Issue 4, 2021, Pages 811-824]
-
Mohammadi, Y.
Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
-
Mohammadi Ajamloo, A.
Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
-
Mohammadipour, P.
Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
-
Mohammadiyan, H.
Provision of an Optimal Strategy to Forecast the Prices Set by the Electricity Market in the Competitive Iranian Energy Market in Fall [Volume 34, Issue 1, 2021, Pages 149-161]
-
Mohammad-Karimi, N.
The Predictability of Tree-based Machine Learning Algorithms in the Big Data Context [Volume 34, Issue 1, 2021, Pages 82-89]
-
Mohammadzadeh, A.
A New Recurrent Radial Basis Function Network-based Model Predictive Control for a Power Plant Boiler Temperature Control [Volume 34, Issue 3, 2021, Pages 667-675]
-
Mohammadzadeh, M.
Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
-
Mohammed-Noor Khudhur, H.
Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
-
Mohebi, M.
Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
-
Mohsenzadeh, M.
The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
-
Mohsenzadeh, S.
Strengthening of RC Beams Using SCC Jacket Consisting of Glass Fiber and Fiber-Silica Fume Composite Gel [Volume 34, Issue 8, 2021, Pages 1923-1939]
-
Mohsin, M. S.
Comparative Study on Structural Behavior of Reinforced Concrete Straight Beam and Beams with out of Plane Parts [Volume 34, Issue 10, 2021, Pages 2280-2293]
-
Mojaver, M.
Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
-
Mokhtarzade, M.
Supervised and Unsupervised Clustering Based Dimensionality Reduction of Hyperspectral Data [Volume 34, Issue 6, 2021, Pages 1407-1412]
-
Molaei, M.J.
Electromagnetic Wave Absorption Properties of Barium Ferrite/Reduced Graphene Oxide Nanocomposites [Volume 34, Issue 6, 2021, Pages 1503-1511]
-
Momin, A. I. A
Flexural Strength and Behavioral Study of High-Performance Concrete Beams using Stress-Block Parameters [Volume 34, Issue 11, 2021, Pages 2557-2565]
-
Monfared, V.
The Prediction of Stress and Strain Behaviors in Composite Gears using FEM [Volume 34, Issue 2, 2021, Pages 556-563]
-
Moosavi, S. M. S.
A Robust Multi-objective Fuzzy Model for a Green Closed-loop Supply Chain Network under Uncertain Demand and Reliability (A Case Study in Engine Oil Industry) [Volume 34, Issue 12, 2021, Pages 2585-2603]
-
More, S. R.
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
-
More, S. R.
Study of the Fracture Behavior under the Effect of Cross-ply and Angle-ply Arrangement of FRP Composite Laminate Subjected to Central Circular Cut-out with Mechanical and Thermal Loading Conditions [Volume 34, Issue 6, 2021, Pages 1523-1529]
-
Mosalman Yazdi, H.
Presenting a New Method for Earthquake Relief Center Location Allocation based on Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 769-781]
-
Mosalman Yazdi, H.
Location Allocation of Earthquake Relief Centers in Yazd City Based on Whale Optimization Algorithm [Volume 34, Issue 5, 2021, Pages 1184-1194]
-
Moshrefi, A.
Employing the Empirical Mode Decomposition to Denoise the Random Telegraph Noise [Volume 34, Issue 1, 2021, Pages 90-96]
-
Moslehi Niasar, M.
Electromagnetic Wave Absorption Properties of Barium Ferrite/Reduced Graphene Oxide Nanocomposites [Volume 34, Issue 6, 2021, Pages 1503-1511]
-
Mos’hafi, M.
Effect of Tail Capacitor on Phase Noise in LC Cross-connected Oscillators: An Analytical Investigation [Volume 34, Issue 1, 2021, Pages 110-119]
-
Mostafavi, M.
Analyzing Vibration as a Useful Domain for Getting Bearing Fault Signals in Induction Motors [Volume 34, Issue 8, 2021, Pages 2010-2020]
-
Motahar, S.
A neural network approach to estimate non-Newtonian behavior of nanofluid phase change material containing mesoporous silica particles [Volume 34, Issue 8, 2021, Pages 1974-1981]
-
Motameni, H.
A Hidden Markov Model for Morphology of Compound Roles in Persian Text Part of Tagging [Volume 34, Issue 11, 2021, Pages 2494-2507]
-
Motie Birjandi, A. A.
An Improved Hierarchical Control Structure for Robust Microgrid Operation and Seamless Mode Transfer under Linear and Nonlinear Loads conditions [Volume 34, Issue 9, 2021, Pages 2167-2179]
-
Mousavi, M. H.
Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
-
Mousavi Bafrouyi, S.M.S
Effects of Road Roughness, Aerodynamics, and Weather Conditions on Automotive Wheel Force [Volume 34, Issue 2, 2021, Pages 536-546]
-
Mu, Y.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Muniraj, D.
Experimental Damage Evaluation of Honeycomb Sandwich with Composite Face Sheets under Impact Load [Volume 34, Issue 4, 2021, Pages 999-1007]
-
Murmu, M.
Effect of Super absorbent polymer on workability, strength and durability of Self consolidating concrete [Volume 34, Issue 5, 2021, Pages 1118-1123]
-
Murugaiyan, V.
Influence of Chemical Admixtures on Geotechnical Properties of Expansive Soil [Volume 34, Issue 1, 2021, Pages 19-25]
-
Muthuramalingam, T.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
N
-
Nabi, H.
The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
-
Nabian, N.
Titanium Dioxide Nanotubes Incorporated Bioactive Glass Nanocomposites: Synthesis, Characterization, Bioactivity Evaluation and Drug Loading [Volume 34, Issue 1, 2021, Pages 1-9]
-
Nadjafi, M.
Reliability Analysis of Notched Plates under Anisotropic Damage Based on Uniaxial Loading Using Continuum Damage Mechanics Approach [Volume 34, Issue 1, 2021, Pages 253-262]
-
Nahvi, A.
Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
-
Nair, S. S.
Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
-
Najafi, S. E.
Provision of an Optimal Strategy to Forecast the Prices Set by the Electricity Market in the Competitive Iranian Energy Market in Fall [Volume 34, Issue 1, 2021, Pages 149-161]
-
Najafi, S.E.
Developing a Bi-objective Mathematical Model to Design the Fish Closed-loop Supply Chain [Volume 34, Issue 5, 2021, Pages 1257-1268]
-
Najafpour, G. D.
Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
-
Naji, H. I.
Management of Abandoned Construction Projects in Iraq Using BIM Technology [Volume 34, Issue 3, 2021, Pages 644-649]
-
Nakhaei, M. R.
Microstructure and mechanical properties of PA6/NBR nanocomposites fabricated by friction stir processing [Volume 34, Issue 10, 2021, Pages 2371-2378]
-
Nakhai Kamalabadi, I.
Price and service competition between two leader-follower retailer-Stackelberg supply chains [Volume 34, Issue 8, 2021, Pages 1982-1993]
-
Namar, M.M.
Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds [Volume 34, Issue 9, 2021, Pages 2137-2147]
-
Naseri, S.A.
Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
-
Nasiri-Zarandi, R.
Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
-
Navabakhsh, M.
Proposing a model for a resilient supply chain: A meta-heuristic algorithm [Volume 34, Issue 12, 2021, Pages 2566-2577]
-
Nazemizadeh, M.
Size-dependent Vibration Analysis of Stepped Nanobeams Based on Surface Elasticity Theory [Volume 34, Issue 3, 2021, Pages 744-749]
-
Nejati, Z.
Actuator Fault Detection and Isolation for Helicopter Unmanned Arial Vehicle in the Present of Disturbance [Volume 34, Issue 3, 2021, Pages 676-681]
-
Nejati, Z.
Robust Three Stage Central Difference Kalman Filter for Helicopter Unmanned Aerial Vehicle Actuators Fault Estimation [Volume 34, Issue 5, 2021, Pages 1290-1296]
-
Nematifard, V.
Experimental Investigation of TIG Welding Input Parameters Effects on Mechanical Characteristics [Volume 34, Issue 2, 2021, Pages 564-571]
-
Nguyen, D. T.
Engineering properties of soil stabilized with cement and fly ash for sustainable road construction [Volume 34, Issue 12, 2021, Pages 2665-2671]
-
Niazi, S.
Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics [Volume 34, Issue 1, 2021, Pages 234-242]
-
Niebles-Nuñez, E. E.
Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
-
Nikolaev, N. I.
Study of Bonding Strength at Salt-cement Interface During Cementation of Salt Layers [Volume 34, Issue 2, 2021, Pages 581-586]
-
Nikzadfar, K.
Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds [Volume 34, Issue 9, 2021, Pages 2137-2147]
-
Noorzad, A.
Physical Modelling of a Strip Footing on a Geosynthetic Reinforced Soil Wall Containing Tire Shred Subjected to Monotonic and Cyclic Loading [Volume 34, Issue 10, 2021, Pages 2266-2279]
-
Noroozinejad Farsangi, E.
Blast Demand Estimation of RC-Moment-Resisting Frames using a Proposed Multi-modal Adaptive Pushover Analysis Procedure [Volume 34, Issue 1, 2021, Pages 46-55]
-
Noroozinejad Farsangi, E.
Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
-
Noroozinejad Farsangi, E.
A Novel Lightweight Phase-changing Cooling Roof Tile [Volume 34, Issue 6, 2021, Pages 1398-1406]
-
Noroozinejad Farsangi, E.
Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
-
Norouzi Sahraei, H.
Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
-
Norozpour Niazi, A.
An Improved Hierarchical Control Structure for Robust Microgrid Operation and Seamless Mode Transfer under Linear and Nonlinear Loads conditions [Volume 34, Issue 9, 2021, Pages 2167-2179]
-
Nosratollahi, M.
Dynamic Response Analysis of a High Glide Ratio Parachute System [Volume 34, Issue 1, 2021, Pages 195-201]
-
Nuraini, L.
A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
O
-
Obruch, H.
Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
-
Ojaghi, M.
Analyzing Vibration as a Useful Domain for Getting Bearing Fault Signals in Induction Motors [Volume 34, Issue 8, 2021, Pages 2010-2020]
-
Omidi, R.
Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
-
Ommi, F.
Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
-
Osanloo, M.
Development of open-pit mine reclamation cost estimation models: A regression-based approach [Volume 34, Issue 11, 2021, Pages 2467-2475]
-
Outassafte, O.
Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
P
-
Pahlavan, H.
Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
-
Pandey, R.
Dual Output Voltage Differencing Buffered Amplifier Based Active -C Multiphase Sinusoidal Oscillator [Volume 34, Issue 6, 2021, Pages 1438-1444]
-
Pant, D.
Operating Wheelchair Using Flex Sensor [Volume 34, Issue 7, 2021, Pages 1703-1709]
-
Pardoyo, P.
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
Parivar, H.
An Improvement on Slot Configuration Structure of a Low-Speed Surface-Mounted Permanent Magnet Synchronous Generator with a Wound Cable Winding [Volume 34, Issue 9, 2021, Pages 2045-2052]
-
Parivar, H.
Design and Modeling of a High-Speed Permanent Magnet Synchronous Generator with a Retention Sleeve of Rotor [Volume 34, Issue 11, 2021, Pages 2433-2441]
-
Pathak, T.
Design of Area Efficient Single Bit Comparator Circuit using Quantum dot Cellular Automata and its Digital Logic Gates Realization [Volume 34, Issue 12, 2021, Pages 2672-2678]
-
Paul, C. P.
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
-
Pavlovskaia, E. E.
Investigation of the Influence of Pressures and Proppant Mass on the Well Parameters after Hydraulic Fracturing [Volume 34, Issue 4, 2021, Pages 1066-1073]
-
Peasura, P.
The Rejuvenation Heat Treatment of Nickel Base Superalloy Grade GTD111 after Long-Term Service via the Taguchi Method for Optimization [Volume 34, Issue 4, 2021, Pages 956-965]
-
Peiravi, M. M.
The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
-
Phalle, V. M.
Gear Fault Detection using Machine Learning Techniques- A Simulation-driven Approach [Volume 34, Issue 1, 2021, Pages 212-223]
-
Phan, N. H.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Phan, N. H.
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Phan, V. T. A.
Engineering properties of soil stabilized with cement and fly ash for sustainable road construction [Volume 34, Issue 12, 2021, Pages 2665-2671]
-
Phani Prasanthi, P.
Waviness Effect of Fiber on Buckling Behavior of Sisal/Carbon Nanotube Reinforced Composites Using Experimental Finite Element Method [Volume 34, Issue 12, 2021, Pages 2617-2623]
-
Pirayesh, M.
Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
-
Poormohammadi, A.
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Pooyan, M.
An Improved Modeling of Parkinson’s Tremor and Investigation of Some Approaches to Remove this Symptom [Volume 34, Issue 5, 2021, Pages 1269-1273]
-
Poplygin, V. V.
Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
-
Poplygin, V. V.
Investigation of the Influence of Pressures and Proppant Mass on the Well Parameters after Hydraulic Fracturing [Volume 34, Issue 4, 2021, Pages 1066-1073]
-
Pordel Maragheh, B.
Evaluating the effect of Buckling-Restrained Braces in Steel Buildings against Progressive failure using Different Simulation Strategies [Volume 34, Issue 10, 2021, Pages 2248-2258]
-
Pourabdoli, M.
New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
-
Pourasad, Y.
A study on the modified algorithm for image processing in Tracking Seam Welding [Volume 34, Issue 8, 2021, Pages 1913-1922]
-
Pourfallah, M.
The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
-
Pourmoosa, A. A.
Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
-
Prifiharni, S.
A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
-
Priyotomo, G.
A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
-
Promakhov, V.
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Purwanto, A.
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
Puspita, K.
Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
-
Putra, I.D.G.A.D
The Post-disaster House: Simple Instant House using Lightweight Steel Structure, Bracing, and Local Wood Wall [Volume 34, Issue 2, 2021, Pages 348-354]
-
Putra, O. A.
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
Q
-
Qolipour, F.
The Predictability of Tree-based Machine Learning Algorithms in the Big Data Context [Volume 34, Issue 1, 2021, Pages 82-89]
R
-
Rabiee, A. H.
Numerical Study on Vibration Attenuation of Cylinder using Active Rotary Oscillating Controller [Volume 34, Issue 1, 2021, Pages 202-211]
-
Rabiee, S. M.
Titanium Dioxide Nanotubes Incorporated Bioactive Glass Nanocomposites: Synthesis, Characterization, Bioactivity Evaluation and Drug Loading [Volume 34, Issue 1, 2021, Pages 1-9]
-
Rafiei, A.
Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
-
Rahil, F. H.
Effect of Hydrodynamic Pressure on Saturated Sand Supporting Liquid Storage Tank During the Earthquake [Volume 34, Issue 5, 2021, Pages 1176-1183]
-
Rahimi, G.
Experimental Investigation on the Effect a Rotational Shaft on the Thermal Behavior of a Circular Tube under Constant Heat Flux [Volume 34, Issue 4, 2021, Pages 1008-1015]
-
Rahimi, S.Behzad
Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
-
Rahimi, V.
Reactive Scheduling Addressing Unexpected Disturbance in Cellular Manufacturing Systems [Volume 34, Issue 1, 2021, Pages 162-170]
-
Rahmani, A. M.
Improving the Load Balancing and Dynamic Placement of Virtual Machines in Cloud Computing using Particle Swarm Optimization Algorithm [Volume 34, Issue 6, 2021, Pages 1419-1429]
-
Rahmanpour, M.
A Study of Blast–Induced Vibration on Oil Pipelines based on Numerical and Field Analysis [Volume 34, Issue 9, 2021, Pages 2116-2123]
-
Rahmi, R.
Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
-
Raj, S. R.
Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
-
Rajabi, A. M.
A Numerical Study of the Effect of Tunneling on Surface Settlement and Existing Buildings [Volume 34, Issue 5, 2021, Pages 1085-1093]
-
Rajabi, M.
Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
-
Rajabnejad, H.
Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
-
Rajaee, M.
Multi-objective Optimization of HMGF Process Parameters for Manufacturing AA6063 Stepped Tubes using FEM-RSM [Volume 34, Issue 5, 2021, Pages 1305-1312]
-
Raja. S, R.
Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
-
Rajchakit, G.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Rakhshani, N.
Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
-
Ramadan, D. O.
Influence of Mould Thickness on Microstructure, Hardness and Wear of AL-Cu Cast Alloys [Volume 34, Issue 8, 2021, Pages 2021-2027]
-
Ramezani Saadatabadi, A.
Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
-
Ramtani, S.
Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
-
Rasay, H.
Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
-
Rashtian, M.
Gain Boosted Folded Cascode Op-Amp with Capacitor Coupled Auxiliary Amplifiers [Volume 34, Issue 5, 2021, Pages 1233-1238]
-
Rasiq, S. M.
Fast Color Straight Line Pattern Recognition in an Object Using High Speed Self Learning Devices [Volume 34, Issue 5, 2021, Pages 1225-1232]
-
Rayhan, S. B.
Elastic Buckling Response of a Composite Panel Stiffened Around Cutouts [Volume 34, Issue 1, 2021, Pages 243-252]
-
Raza, R. S.
Routing Protocols for IOT Applications based on Distributed Learning [Volume 34, Issue 4, 2021, Pages 825-831]
-
Razavi, H.
Adpative Neuro-Fuzzy Inference System Estimation Propofol dose in the induction phase during anesthesia; case study [Volume 34, Issue 9, 2021, Pages 2148-2156]
-
Razavi, S. E.
Sensitivity Analysis on Thermal Performance of Gas Heater with Finned and Finless Tubes using Characteristics-based Method [Volume 34, Issue 6, 2021, Pages 1537-1544]
-
Razmkhah, M. H.
Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
-
Reddy, S.H.
Mechanical Behaviour of Nano-material (Al2O3) Stabilized Soft Soil [Volume 34, Issue 3, 2021, Pages 636-643]
-
Ren, J. J.
The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
-
Rezaei, F.
Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
-
Rezaei, H.
A Hidden Markov Model for Morphology of Compound Roles in Persian Text Part of Tagging [Volume 34, Issue 11, 2021, Pages 2494-2507]
-
Reza Kashyzadeh, K.
Effects of Road Roughness, Aerodynamics, and Weather Conditions on Automotive Wheel Force [Volume 34, Issue 2, 2021, Pages 536-546]
-
Rezazadeh, G.
Selective Harmonic Elimination of a Multilevel Voltage Source Inverter Using Whale Optimization Algorithm [Volume 34, Issue 8, 2021, Pages 1898-1904]
-
Rezvani, M.
A Game-Theoretic Approach for Robust Federated Learning [Volume 34, Issue 4, 2021, Pages 832-842]
-
Riabokon, E. P.
Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
-
Rifai, S.
Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
-
Riskiyah, I. R.
High-contribution of strip glass waste in buckling-strengthening of slim GLARC columns at once avoiding ASR deterioration problems in concrete materials [Volume 34, Issue 11, 2021, Pages 2452-2466]
-
Rizal, A.
Epileptic Electroencephalogram Classification using Relative Wavelet Sub-Band Energy and Wavelet Entropy [Volume 34, Issue 1, 2021, Pages 75-81]
-
Rochardjo, H. S.B.
Experimental Study of Polyvinyl Alcohol Nanocomposite Film Reinforced by Cellulose Nanofibers from Agave Cantala [Volume 34, Issue 4, 2021, Pages 987-998]
-
Rochman, T.
High-contribution of strip glass waste in buckling-strengthening of slim GLARC columns at once avoiding ASR deterioration problems in concrete materials [Volume 34, Issue 11, 2021, Pages 2452-2466]
-
Rostami, M.
Photo-degradation of P-Nitro Toluene Using Modified Bentonite Based Nano-TiO2 Photocatalyst in Aqueous Solution [Volume 34, Issue 4, 2021, Pages 756-762]
-
Roy, S.
Design of Area Efficient Single Bit Comparator Circuit using Quantum dot Cellular Automata and its Digital Logic Gates Realization [Volume 34, Issue 12, 2021, Pages 2672-2678]
-
Rusli, N. S. N.
Effect of Cutting Environment and Swept Angle Selection in Milling Operation [Volume 34, Issue 12, 2021, Pages 2578-2584]
-
Rylnikova, M. V.
Exploration of Rhenium Volcanogenic Deposit and Technology of Its Development [Volume 34, Issue 4, 2021, Pages 1052-1065]
-
Rylnikova, M. V.
Kudryavy Volcano Crater Thick Rocks Electrical Breakdown Study in 50 Hz Electromagnetic Field [Volume 34, Issue 5, 2021, Pages 1371-1380]
S
-
Saadat, M.
A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
-
Saadati, M.
Proposing a New Image Watermarking Method Using Shearlet Transform and Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 843-853]
-
Saboohi, Y.
Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
-
Saboohi, Z.
Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
-
Sabree, I. K.
Effect of Additional Zirconia on Fracture Mechanics of Bioactive Glass-ceramics Using Digital Image Correlation [Volume 34, Issue 9, 2021, Pages 2053-2059]
-
Sadeghian, M.S.
Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
-
Sadeghian, T.
Earthquake prediction modeling using dynamic changes (Case Study: Alborz Region) [Volume 34, Issue 2, 2021, Pages 355-366]
-
Sadeghiyan, B.
Private Trajectory Intersection Testing: Is Garbled Circuit Better than Custom Protocols? [Volume 34, Issue 4, 2021, Pages 863-872]
-
Sadjadi, S. M.
A Two-Level Semi-supervised Clustering Technique for News Articles [Volume 34, Issue 12, 2021, Pages 2648-2657]
-
Sadrnezhaad, S.K.
Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
-
Saeidian, P.
Mechanical Properties of Ultra-high Performance Concrete Reinforced by Glass Fibers under Accelerated Aging [Volume 34, Issue 5, 2021, Pages 1074-1084]
-
Safaie, N.
Effect of Sensory Experience on Customer Word-of-mouth Intention, Considering the Roles of Customer Emotions, Satisfaction, and Loyalty [Volume 34, Issue 3, 2021, Pages 682-699]
-
Safaie, N.
Effect of motivation, opportunity and ability on human resources information security management considering the roles of Attitudinal, behavioral and organizational factors [Volume 34, Issue 12, 2021, Pages 2624-2635]
-
Safar, M.
Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
-
Safari, M.
Statistical Modeling, Optimization and Sensitivity Analysis of Tool’s Geometrical Parameters on Process Force in Automatic Cortical Bone Drilling Process [Volume 34, Issue 2, 2021, Pages 528-535]
-
Safikhani, H.
Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
-
Safikhani, H.
Investigating the Performance of CO Boiler Burners in the RFCC Unit with CFD Simulation [Volume 34, Issue 3, 2021, Pages 587-597]
-
Safikhani, H.
Multi objective optimization of multi-hole orifices using FSI analysis and NSGA II algorithm [Volume 34, Issue 8, 2021, Pages 2038-2044]
-
Saghehei, E.
A Bi-level Programming Approach for Pre-positioning Emergency Warehouses [Volume 34, Issue 1, 2021, Pages 128-139]
-
Saha, P.
Reducing Quantum Cost for Reversible Realization of Densely-packed-decimal Converters [Volume 34, Issue 5, 2021, Pages 1284-1289]
-
Sahebi Hamrah, Z.
New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
-
Sahith Reddy, S.
Optimization of Calcined Bentonite Clay Utilization in Cement Mortar using Response Surface Methodology [Volume 34, Issue 7, 2021, Pages 1623-1631]
-
Sahraeian, R.
Robust and Stable Flow Shop Scheduling Problem under Uncertain Processing Times and Machines’ Disruption [Volume 34, Issue 4, 2021, Pages 935-947]
-
Saidi-Mehrabad, M.
A Bi-objective Robust Optimization Model for an Integrated Production-distribution Problem of Perishable Goods with Demand Improvement Strategies: A Case Study [Volume 34, Issue 7, 2021, Pages 1766-1777]
-
Saindane, U. V.
Dry sliding behavior of carbon-based brake pad materials [Volume 34, Issue 11, 2021, Pages 2517-2524]
-
Saini, D. K. J.
An Efficient Approach for Edge Detection Technique Using Kalman Filter with Artificial Neural Network [Volume 34, Issue 12, 2021, Pages 2604-2610]
-
Sajadi, S. M.
Proposing a model for a resilient supply chain: A meta-heuristic algorithm [Volume 34, Issue 12, 2021, Pages 2566-2577]
-
Sakthivel, V. P.
Squirrel Search Optimization for Non-convex Multi-area Economic Dispatch [Volume 34, Issue 1, 2021, Pages 120-127]
-
Salehinai, S.R.
Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
-
Salehpour, F.
Experimental Investigation of TIG Welding Input Parameters Effects on Mechanical Characteristics [Volume 34, Issue 2, 2021, Pages 564-571]
-
Salim, U. A.
Effects of cold rolling and annealing time on fatigue resistance of AA5052 aluminum alloy [Volume 34, Issue 9, 2021, Pages 2189-2197]
-
Samuel, S.
Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
-
Saneei Siavashy, O.
Titanium Dioxide Nanotubes Incorporated Bioactive Glass Nanocomposites: Synthesis, Characterization, Bioactivity Evaluation and Drug Loading [Volume 34, Issue 1, 2021, Pages 1-9]
-
Sanggoro, H. B.
Soft System Methodology: Project vs Local Community Interests in Project Social Conflict [Volume 34, Issue 9, 2021, Pages 2107-2115]
-
Santos, T. F.A.
Control of Steel Detachment and Metal Flow on Aluminum-Steel Friction Stir Welding of thin Joints [Volume 34, Issue 4, 2021, Pages 1024-1034]
-
Sapronova, Z.
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Sartika, J.
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
Sarvalishah, M.
Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics [Volume 34, Issue 1, 2021, Pages 234-242]
-
Sassani, F.
Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
-
Sathya, P. D.
Squirrel Search Optimization for Non-convex Multi-area Economic Dispatch [Volume 34, Issue 1, 2021, Pages 120-127]
-
Sayari, A.
Retrofitting of RC Beams using Reinforced Self-compacting Concrete Jackets Containing Aluminum Oxide Nanoparticles [Volume 34, Issue 5, 2021, Pages 1195-1212]
-
Sebt, M.H.
The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
-
Sedaghat, M.
Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method [Volume 34, Issue 11, 2021, Pages 2408-2417]
-
Seifbarghy, M.
A Robust Multi-objective Fuzzy Model for a Green Closed-loop Supply Chain Network under Uncertain Demand and Reliability (A Case Study in Engine Oil Industry) [Volume 34, Issue 12, 2021, Pages 2585-2603]
-
Sekhavat, M.
Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
-
Sepas Hokmabadi, A.
Robust Design of Reinforced Concrete Moment-Resisting Frames [Volume 34, Issue 10, 2021, Pages 2238-2247]
-
Setyarini, P. H.
Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
-
Seydi, V.
Proposing a New Image Watermarking Method Using Shearlet Transform and Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 843-853]
-
Seyed-Hosseini, S.M.
A Bi-objective Robust Optimization Model for an Integrated Production-distribution Problem of Perishable Goods with Demand Improvement Strategies: A Case Study [Volume 34, Issue 7, 2021, Pages 1766-1777]
-
Sha, Y.
Axial Compression Performance of Square Tube Filled with Foam Aluminum [Volume 34, Issue 5, 2021, Pages 1336-1344]
-
Shabakhty, N.
The Effect of Stochastic Properties of Strength Reduction Function on The Time-Dependent Reliability of RC Structures [Volume 34, Issue 2, 2021, Pages 572-580]
-
Shafaei, J.
Performance of Reinforced Concrete Shear Wall Equipped with an Innovative Hybrid Damper [Volume 34, Issue 7, 2021, Pages 1632-1643]
-
Shafaei, J.
Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
-
Shafaghat, R.
Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds [Volume 34, Issue 9, 2021, Pages 2137-2147]
-
Shafaghat, R.
Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
-
Shafaghizadeh, S.
Proposing a model for a resilient supply chain: A meta-heuristic algorithm [Volume 34, Issue 12, 2021, Pages 2566-2577]
-
Shafiee, M.
Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
-
Shahgholi, M.
Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
-
Shahmir, S.
Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
-
Shahraini, S.I.
Ratcheting Analysis of Steel Plate under Cycling Loading using Dynamic Relaxation Method Experimentally Validated [Volume 34, Issue 6, 2021, Pages 1530-1536]
-
Shahrajabian, H.
Experimental Study on Mechanical, Thermal and Antibacterial Properties of Hybrid Nanocomposites of PLA/CNF/Ag [Volume 34, Issue 2, 2021, Pages 500-507]
-
Shaikhiev, I.
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Shakurova, N.
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Shamekhi Amiri, M.
Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
-
Shamsi-Sarband, A.
Numerical analyses of Manufacturing of an AA8111 Pin-shaped Bipolar Plate by Hot Metal Gas Forming [Volume 34, Issue 8, 2021, Pages 1994-2001]
-
Sharafi, P.
Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
-
Sharanya, A.G.
Soil Shrinkage Characterization of Low Plasticity Soil Using Digital Image Analysis Process [Volume 34, Issue 10, 2021, Pages 2206-2212]
-
Sharifi, N.
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Sheikh, K.
Experimental Study on Mechanical, Thermal and Antibacterial Properties of Hybrid Nanocomposites of PLA/CNF/Ag [Volume 34, Issue 2, 2021, Pages 500-507]
-
Sheikholharam Mashhadi, P.
Proposing a New Image Watermarking Method Using Shearlet Transform and Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 843-853]
-
Shoaei, O.
Employing the Empirical Mode Decomposition to Denoise the Random Telegraph Noise [Volume 34, Issue 1, 2021, Pages 90-96]
-
Shojaei, M.R.
Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
-
Shojaei, M.R.
Utilization of Gene Expression Programming for Modeling of Mechanical Performance of Titanium/Carbonated Hydroxyapatite Nanobiocomposites: The Combination of Artificial Intelligence and Material Science [Volume 34, Issue 4, 2021, Pages 948-955]
-
Shokoohi Rad, A.
Risk Assessment of Gasoline Storage Unit of National Iranian Oil Product Distribution Company using PHAST Software [Volume 34, Issue 4, 2021, Pages 763-768]
-
Shokri, A.
Photo-degradation of P-Nitro Toluene Using Modified Bentonite Based Nano-TiO2 Photocatalyst in Aqueous Solution [Volume 34, Issue 4, 2021, Pages 756-762]
-
Shuaib, N. A.
Effect of Cutting Environment and Swept Angle Selection in Milling Operation [Volume 34, Issue 12, 2021, Pages 2578-2584]
-
Siddharth, D.
An Efficient Approach for Edge Detection Technique Using Kalman Filter with Artificial Neural Network [Volume 34, Issue 12, 2021, Pages 2604-2610]
-
Singh, H.
Orthotropic Coefficients and Continuity Factors of Reinforced Concrete Slabs Supported on 3-sides [Volume 34, Issue 2, 2021, Pages 375-381]
-
Singh, N. K.
Intrusion Detection in Cyber-Physical Layer of Smart Grid Using Intelligent Loop Based Artificial Neural Network Technique [Volume 34, Issue 5, 2021, Pages 1250-1256]
-
Singh, N.
Operating Wheelchair Using Flex Sensor [Volume 34, Issue 7, 2021, Pages 1703-1709]
-
Singh, P.
An Efficient Approach for Edge Detection Technique Using Kalman Filter with Artificial Neural Network [Volume 34, Issue 12, 2021, Pages 2604-2610]
-
Sirimontreea, S.
Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
-
Sivaji Babu, K.
Waviness Effect of Fiber on Buckling Behavior of Sisal/Carbon Nanotube Reinforced Composites Using Experimental Finite Element Method [Volume 34, Issue 12, 2021, Pages 2617-2623]
-
Sivandi-Pour, A.
Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
-
Sobouti, M. A.
Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
-
Solanki, C. H.
An Experimental Investigation on Black Cotton Soil using Terrazyme [Volume 34, Issue 8, 2021, Pages 1837-1844]
-
Soleimani-Amiri, S.
Design and Analysis of High Efficiency Perovskite Solar Cells with Light Trapping Nano-textured Substrates [Volume 34, Issue 4, 2021, Pages 873-880]
-
Soliman, N. F.
Influence of Mould Thickness on Microstructure, Hardness and Wear of AL-Cu Cast Alloys [Volume 34, Issue 8, 2021, Pages 2021-2027]
-
Soltani, F.
Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
-
Song, N.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Soni, S.
Dry sliding behavior of carbon-based brake pad materials [Volume 34, Issue 11, 2021, Pages 2517-2524]
-
Sreehari, V.M.
Experimental Damage Evaluation of Honeycomb Sandwich with Composite Face Sheets under Impact Load [Volume 34, Issue 4, 2021, Pages 999-1007]
-
Sri Harsha, A.
Fused Deposition Modeling of an Aircraft Wing using Industrial Robot with Non-linear Tool Path Generation [Volume 34, Issue 1, 2021, Pages 272-282]
-
Stephen, E. A.
Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
-
Stroykov, G. A.
System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
-
Subagyo, R.
Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
-
Sudhakar Babu, S.
Mathematical Modeling & Multi Response Optimization for Improving Machinability of Alloy Steel Using RSM, GRA and Jaya Algorithm [Volume 34, Issue 9, 2021, Pages 2157-2166]
-
Sumardi, Dr.
High-contribution of strip glass waste in buckling-strengthening of slim GLARC columns at once avoiding ASR deterioration problems in concrete materials [Volume 34, Issue 11, 2021, Pages 2452-2466]
-
Sun, C.
Numerical Investigation of the Heat-Fluid Characteristic inside High-Speed Angular Contact Ball Bearing Lubricated with Grease [Volume 34, Issue 5, 2021, Pages 1313-1320]
-
Sundjono, S.
A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
-
Supandi, S.
Simple Slope Stabilization on Quartz Sandstone using Horizontal Drain [Volume 34, Issue 4, 2021, Pages 1046-1051]
-
Suratgar, A. Abolfazl
A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
-
Suresh, R.
Influence of Chemical Admixtures on Geotechnical Properties of Expansive Soil [Volume 34, Issue 1, 2021, Pages 19-25]
-
Sureshkumar, D.
Experimental and Finite Element Analysis of Single Stage Single Point Incremental Forming [Volume 34, Issue 10, 2021, Pages 2259-2265]
-
Sutarja, I.N.
The Post-disaster House: Simple Instant House using Lightweight Steel Structure, Bracing, and Local Wood Wall [Volume 34, Issue 2, 2021, Pages 348-354]
-
Sverguzova, S.
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Svistunov, O.
Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]
T
-
Tabasi, M.
Analyzing Vibration as a Useful Domain for Getting Bearing Fault Signals in Induction Motors [Volume 34, Issue 8, 2021, Pages 2010-2020]
-
Tabasi, S.
An Application of Fuzzy-VIKOR Method in Environmental Impact Assessment of the Boog Mine Southeast of Iran [Volume 34, Issue 6, 2021, Pages 1545-1556]
-
Tabatabaee Moradi, S.S
Study of Bonding Strength at Salt-cement Interface During Cementation of Salt Layers [Volume 34, Issue 2, 2021, Pages 581-586]
-
Tadarok, Samin
A Mathematical Model for a Blood Supply Chain Network with the Robust Fuzzy Possibilistic Programming Approach: A Case Study at Namazi Hospital [Volume 34, Issue 6, 2021, Pages 1493-1502]
-
Taebi, M.
A Numerical Study of the Effect of Tunneling on Surface Settlement and Existing Buildings [Volume 34, Issue 5, 2021, Pages 1085-1093]
-
Taghaddos, H.
The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
-
Taghilou, M.
Towards a Uncertainty Analysis in Thermal Protection using Phase-change Micro/Nano Particles during Hyperthermia [Volume 34, Issue 1, 2021, Pages 263-271]
-
Taghiyareh, F.
Effect of Segregation on Opinion Formation in Scale-Free Social Networks: An Agent-based Approach [Volume 34, Issue 1, 2021, Pages 66-74]
-
Tahanian, E.
A Game-Theoretic Approach for Robust Federated Learning [Volume 34, Issue 4, 2021, Pages 832-842]
-
Taheri, A. A.
Towards a Uncertainty Analysis in Thermal Protection using Phase-change Micro/Nano Particles during Hyperthermia [Volume 34, Issue 1, 2021, Pages 263-271]
-
Taheri, E.
Any-time randomized kinodynamic path planning algorithm in dynamic environments with application to quadrotor [Volume 34, Issue 10, 2021, Pages 2360-2370]
-
Taheri, M.
Multi objective optimization of multi-hole orifices using FSI analysis and NSGA II algorithm [Volume 34, Issue 8, 2021, Pages 2038-2044]
-
Taheri, M.
Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
-
Tahmasbi, V.
Statistical Modeling, Optimization and Sensitivity Analysis of Tool’s Geometrical Parameters on Process Force in Automatic Cortical Bone Drilling Process [Volume 34, Issue 2, 2021, Pages 528-535]
-
Tahmsbi, V.
Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
-
Tai, B. T.
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Talesh Amiri, S.
Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
-
Tam, N. C.
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Tao, L.
The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
-
Tariverdilo, S.
Robust Design of Reinforced Concrete Moment-Resisting Frames [Volume 34, Issue 10, 2021, Pages 2238-2247]
-
Tarokh, M.
Semantic Segmentation of Lesions from Dermoscopic Images using Yolo-DeepLab Networks [Volume 34, Issue 2, 2021, Pages 458-469]
-
Tavakkoli-Moghaddam, R.
A Blood Supply Chain Network with Backup Facilities Considering Blood Groups and Expiration Date: A Real-world Application [Volume 34, Issue 2, 2021, Pages 470-479]
-
Tavakkoli-Moghaddam, R.
Developing a Bi-objective Mathematical Model to Design the Fish Closed-loop Supply Chain [Volume 34, Issue 5, 2021, Pages 1257-1268]
-
Tavakoli, A.
Stability Analysis of AC/DC Microgrids in Island Mode [Volume 34, Issue 7, 2021, Pages 1750-1765]
-
Tavakoli, O.
Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
-
Tavoosi, J.
A New Recurrent Radial Basis Function Network-based Model Predictive Control for a Power Plant Boiler Temperature Control [Volume 34, Issue 3, 2021, Pages 667-675]
-
Tezcan, H. O.
Planned Special Event Travel Demand Model Development [Volume 34, Issue 2, 2021, Pages 336-347]
-
Thabah, S. Diamond
Reducing Quantum Cost for Reversible Realization of Densely-packed-decimal Converters [Volume 34, Issue 5, 2021, Pages 1284-1289]
-
Thanh Tung, N.
Experimental Analysis for Determination of Longitudinal Friction Coefficient Function in Braking Tractor Semi-trailer [Volume 34, Issue 7, 2021, Pages 1799-1803]
-
Thien, N. V.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Thongchom, C.
Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
-
Thyagaraj, T.
Soil Shrinkage Characterization of Low Plasticity Soil Using Digital Image Analysis Process [Volume 34, Issue 10, 2021, Pages 2206-2212]
-
Titouche, N.
Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
-
Tiwan, H.
Effect of Pin Geometry and Tool Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Spot Welded Joints in AA2024-O Aluminum Alloy [Volume 34, Issue 8, 2021, Pages 1949-1960]
-
Toocharoen, S.
The Rejuvenation Heat Treatment of Nickel Base Superalloy Grade GTD111 after Long-Term Service via the Taguchi Method for Optimization [Volume 34, Issue 4, 2021, Pages 956-965]
-
Torabi, A.
Effect of Sensory Experience on Customer Word-of-mouth Intention, Considering the Roles of Customer Emotions, Satisfaction, and Loyalty [Volume 34, Issue 3, 2021, Pages 682-699]
-
Torab-Mostaedi, M.
Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach [Volume 34, Issue 2, 2021, Pages 508-516]
-
Torkaman, R.
Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach [Volume 34, Issue 2, 2021, Pages 508-516]
-
Torres, E. A.
Control of Steel Detachment and Metal Flow on Aluminum-Steel Friction Stir Welding of thin Joints [Volume 34, Issue 4, 2021, Pages 1024-1034]
-
Trimulyono, A.
Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
-
Triwardono, J.
A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
-
Truong, D. V
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Tsigelnyuk, E. Y.
Analysis on Effect of Fullerene Soot on the Chemical and Physical Properties of Cement Mixtures [Volume 34, Issue 10, 2021, Pages 2313-2318]
-
Turbakov, M. S.
Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
U
-
Unfried-Silgado, J.
Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
-
Unyong, B.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Urazbakhtin, R. Y.
Evaluating the Efficiency of Coal Loading Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]
V
-
Vadivel, R.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Vafapour, M.
Gain Boosted Folded Cascode Op-Amp with Capacitor Coupled Auxiliary Amplifiers [Volume 34, Issue 5, 2021, Pages 1233-1238]
-
Vahidi, J.
Proposing a New Image Watermarking Method Using Shearlet Transform and Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 843-853]
-
Valinataj, M.
An Enhanced Self-checking Carry Select Adder Utilizing the Concept of Self-checking Full Adder [Volume 34, Issue 2, 2021, Pages 433-442]
-
Valizadeh, S.
Price and service competition between two leader-follower retailer-Stackelberg supply chains [Volume 34, Issue 8, 2021, Pages 1982-1993]
-
Vanu Madhav, V. V.
Study of the Fracture Behavior under the Effect of Cross-ply and Angle-ply Arrangement of FRP Composite Laminate Subjected to Central Circular Cut-out with Mechanical and Thermal Loading Conditions [Volume 34, Issue 6, 2021, Pages 1523-1529]
-
Vasegh, N.
An Improved Hierarchical Control Structure for Robust Microgrid Operation and Seamless Mode Transfer under Linear and Nonlinear Loads conditions [Volume 34, Issue 9, 2021, Pages 2167-2179]
-
Vasiya, V.
An Experimental Investigation on Black Cotton Soil using Terrazyme [Volume 34, Issue 8, 2021, Pages 1837-1844]
-
Veda Spandana, V
Experimental Study on Yttria Stabilized and Titanium Oxide Thermal Barrier Coated Piston Effect on Engine Performance and Emission Characteristics [Volume 34, Issue 12, 2021, Pages 2611-2616]
-
Venkata Vishnu, A.
Mathematical Modeling & Multi Response Optimization for Improving Machinability of Alloy Steel Using RSM, GRA and Jaya Algorithm [Volume 34, Issue 9, 2021, Pages 2157-2166]
-
Venkateswarlu, K
Experimental Study on Yttria Stabilized and Titanium Oxide Thermal Barrier Coated Piston Effect on Engine Performance and Emission Characteristics [Volume 34, Issue 12, 2021, Pages 2611-2616]
-
Venkateswarlu, K.
Effect of Super absorbent polymer on workability, strength and durability of Self consolidating concrete [Volume 34, Issue 5, 2021, Pages 1118-1123]
-
Venu Madhav, V. V.
Experimental Study on Yttria Stabilized and Titanium Oxide Thermal Barrier Coated Piston Effect on Engine Performance and Emission Characteristics [Volume 34, Issue 12, 2021, Pages 2611-2616]
-
Veysi, F.
Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
-
Vikram Kumar, Ch R.
Fused Deposition Modeling of an Aircraft Wing using Industrial Robot with Non-linear Tool Path Generation [Volume 34, Issue 1, 2021, Pages 272-282]
-
Voynarenko, M. P.
Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]
W
-
Waleed Jummah, N.
Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
-
Wang, B.
Numerical Investigation of the Heat-Fluid Characteristic inside High-Speed Angular Contact Ball Bearing Lubricated with Grease [Volume 34, Issue 5, 2021, Pages 1313-1320]
-
Wang, Z.
Numerical Investigation of the Heat-Fluid Characteristic inside High-Speed Angular Contact Ball Bearing Lubricated with Grease [Volume 34, Issue 5, 2021, Pages 1313-1320]
-
Wani, S. B.
Study of Bond Strength of Plain Surface Wave Type Configuration Rebars with Concrete: A Comparative Study [Volume 34, Issue 2, 2021, Pages 326-335]
-
Wei, Z.
Effects of Deceleration on Secondary Collisions between Adult Occupants and the Vehicle in Frontal Crash Accidents [Volume 34, Issue 12, 2021, Pages 2658-2664]
-
Widiyandari, H.
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
Wu, Y.
Numerical Investigation of the Heat-Fluid Characteristic inside High-Speed Angular Contact Ball Bearing Lubricated with Grease [Volume 34, Issue 5, 2021, Pages 1313-1320]
Y
-
Yadav, A.
Prolong Stability Period in Node Pairing Protocol for Wireless Sensor Networks [Volume 34, Issue 12, 2021, Pages 2679-2687]
-
Yadav, A.
Prolong Stability Period in Node Pairing Protocol for Wireless Sensor Networks [Volume 34, Issue 12, 2021, Pages 2679-2687]
-
Yadav, K.
Human Action Recognition using Prominent Camera [Volume 34, Issue 2, 2021, Pages 427-432]
-
Yaghobi, H.
Analysis of a New Linear Dual Stator Consequent Pole Halbach Array Flux Reversal Machine [Volume 34, Issue 8, 2021, Pages 2002-2009]
-
Yagoob, J. A.
Influence of Mould Thickness on Microstructure, Hardness and Wear of AL-Cu Cast Alloys [Volume 34, Issue 8, 2021, Pages 2021-2027]
-
Yahyazadeh, M.
Novel Particle Swarm Optimization Algorithm Based on President Election: Applied to a Renewable Hybrid Power System Controller [Volume 34, Issue 1, 2021, Pages 97-109]
-
Yang, J.
Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
-
Yang, K.
Axial Compression Performance of Square Tube Filled with Foam Aluminum [Volume 34, Issue 5, 2021, Pages 1336-1344]
-
Yarmohammadi, H.
Prediction of Drug-Target Protein Interaction Based on the Minimization of Weighted Nuclear Norm and Similarity Graph between Drugs and Target Proteins [Volume 34, Issue 7, 2021, Pages 1736-1742]
-
Yousefi, M.
Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
-
Yousefi, M.
Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
-
Yousefi, M.
Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
-
Yousefipour, A.
Improving the Load Balancing and Dynamic Placement of Virtual Machines in Cloud Computing using Particle Swarm Optimization Algorithm [Volume 34, Issue 6, 2021, Pages 1419-1429]
-
Yu, T.
Axial Compression Performance of Square Tube Filled with Foam Aluminum [Volume 34, Issue 5, 2021, Pages 1336-1344]
-
Yudhanto, F.
Experimental Study of Polyvinyl Alcohol Nanocomposite Film Reinforced by Cellulose Nanofibers from Agave Cantala [Volume 34, Issue 4, 2021, Pages 987-998]
Z
-
Zainal, Z. A.
Effect of Cutting Environment and Swept Angle Selection in Milling Operation [Volume 34, Issue 12, 2021, Pages 2578-2584]
-
Zamanian, M.
Physical Modelling of a Strip Footing on a Geosynthetic Reinforced Soil Wall Containing Tire Shred Subjected to Monotonic and Cyclic Loading [Volume 34, Issue 10, 2021, Pages 2266-2279]
-
Zandvakili, A.
Energy-aware task scheduling in cloud compting based on discrete pathfinder algorithm [Volume 34, Issue 9, 2021, Pages 2124-2136]
-
Zare, H.
Efficient Removal of Copper Ion from Aqueous Solution using Crosslinked Chitosan Grafted with Polyaniline [Volume 34, Issue 2, 2021, Pages 305-312]
-
Zarei-Ghanavati, M.
Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
-
Zarepor Ashkezari, A.
Presenting a New Method for Earthquake Relief Center Location Allocation based on Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 769-781]
-
Zarepor Ashkezari, A.
Location Allocation of Earthquake Relief Centers in Yazd City Based on Whale Optimization Algorithm [Volume 34, Issue 5, 2021, Pages 1184-1194]
-
Zavari, M.
The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
-
Zeighami, E.
Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
-
Zende, A. A.
Flexural Strength and Behavioral Study of High-Performance Concrete Beams using Stress-Block Parameters [Volume 34, Issue 11, 2021, Pages 2557-2565]
-
Zhang, K.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Zhao, C. W.
The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
-
Zhou, G.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Zhu, M.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Ziaratban, M.
Semantic Segmentation of Lesions from Dermoscopic Images using Yolo-DeepLab Networks [Volume 34, Issue 2, 2021, Pages 458-469]
-
Zirakian, T.
Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
-
Zohrevand, A.
Deep Convolutional Neural Network for Finger-Knuckle-Print Recognition [Volume 34, Issue 7, 2021, Pages 1684-1693]
-
Zohrevand, A.
Holistic Persian Handwritten Word Recognition Using Convolutional Neural Network [Volume 34, Issue 8, 2021, Pages 2028-2037]
-
Zomorodian, R.
Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
Your query does not match with any item